Dell Inspiron 14 M4040 Display Assembly Replacement Repair Guide

Difficulty

Easy

Steps

8

Time Required

                          5 - 15 minutes            

Sections

1

• Display Assembly
• 8 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackDell Inspiron 14 M4040

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Disconnecting the Display Cable               

• WARNING: Before working inside your computer, read the safety information that shipped with your computer.
• CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
• Disconnect the display cable from the connector on the system board.

WARNING: Before working inside your computer, read the safety information that shipped with your computer.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

Disconnect the display cable from the connector on the system board.

1024

Step 2

              Disconnect the Cables               

• Disconnect the Mini-Card antenna cables from the connectors on the Mini-Card.

Disconnect the Mini-Card antenna cables from the connectors on the Mini-Card.

Step 3

              Remove the Cables               

• Make a note of the display cable and Mini-Card antenna cables routing and remove the cables from the routing guides.

Make a note of the display cable and Mini-Card antenna cables routing and remove the cables from the routing guides.

Step 4

              Remove the Screws               

• Remove the two screws that secure the display assembly to the computer base.

Remove the two screws that secure the display assembly to the computer base.

Step 5

              Removing the Display Assembly               

• Lift and remove the display assembly out of the computer base.

Lift and remove the display assembly out of the computer base.

Step 6

              Placing the Display Assembly               

• Place the NEW display assembly in position and replace the two screws that secure the display assembly to the computer base.

Place the NEW display assembly in position and replace the two screws that secure the display assembly to the computer base.

Step 7

              Routing the Cable               

• Route the display cable and Mini-Card antenna cables through the routing guides.

Route the display cable and Mini-Card antenna cables through the routing guides.

Step 8

              Connect the Display Cable               

• Connect the display cable to the connector on the system board.

Connect the display cable to the connector on the system board.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Terrence15                     

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges                           

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored