Difficulty

Easy

Steps

12

Time Required

                          15 - 40 minutes            

Sections

1

  • Hard Drive
  • 12 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Inspiron 14 7460

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Disconnecting the Hard-Drive Cable               
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions inAfter Working Inside Your Computer.
  • CAUTION: Hard drives are fragile. Exercise care when handling the hard drive.
  • CAUTION: To avoid data loss, do not remove the hard drive while the computer is in sleep or on state.
  • Open the latch and disconnect the hard-drive cable from the system board.

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions inAfter Working Inside Your Computer.

CAUTION: Hard drives are fragile. Exercise care when handling the hard drive.

CAUTION: To avoid data loss, do not remove the hard drive while the computer is in sleep or on state.

Open the latch and disconnect the hard-drive cable from the system board.

1024

Step 2

              Remove the Screws               
  • Remove the four screws (M2x3) that secure the hard-drive assembly to the palm rest and keyboard assembly.

Remove the four screws (M2x3) that secure the hard-drive assembly to the palm rest and keyboard assembly.

Step 3

              Lifting the Hard-Drive Assembly               
  • Lift the hard-drive assembly off the palm rest and keyboard assembly.

Lift the hard-drive assembly off the palm rest and keyboard assembly.

Step 4

              Disconnecting the Interposer               
  • Disconnect the interposer from the hard-drive assembly.

Disconnect the interposer from the hard-drive assembly.

Step 5

              Remove the Screws               
  • Remove the four screws (M3x3) that secure the hard-drive bracket to the hard drive.

Remove the four screws (M3x3) that secure the hard-drive bracket to the hard drive.

Step 6

              Lifting the Hard-Drive               
  • Lift the hard-drive bracket off the hard drive.

Lift the hard-drive bracket off the hard drive.

Step 7

              Align the Screw Holes               
  • Align the screw holes on the hard-drive bracket with the screw holes on the NEW hard drive.

Align the screw holes on the hard-drive bracket with the screw holes on the NEW hard drive.

Step 8

              Replace the Screws               
  • Replace the four screws (M3x3) that secure the hard-drive bracket to the hard drive.

Replace the four screws (M3x3) that secure the hard-drive bracket to the hard drive.

Step 9

              Connecting the Interposer               
  • Connect the interposer to the hard-drive assembly.

Connect the interposer to the hard-drive assembly.

Step 10

              Align the Screw Holes               
  • Align the screw holes on the hard-drive assembly with the screw holes on the palm rest and keyboard assembly.

Align the screw holes on the hard-drive assembly with the screw holes on the palm rest and keyboard assembly.

Step 11

              Replace the Screws               
  • Replace the four screws (M2x3) that secure the hard-drive assembly to the palm rest and keyboard assembly.

Replace the four screws (M2x3) that secure the hard-drive assembly to the palm rest and keyboard assembly.

Step 12

              Connecting the Hard-Drive Cable               
  • Connect the hard-drive cable to the system board.

Connect the hard-drive cable to the system board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Terrence15                     

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges                           

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored