Difficulty
Easy
Steps
13
Time Required
15 - 25 minutes
Sections
1
- Hard Drive
- 13 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackDell Inspiron 14 7447
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Disconnecting the Hard-Drive Cable
- WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
- CAUTION: Hard drives are fragile. Exercise care when handling the hard drive.
- CAUTION: To avoid data loss, do not remove the hard drive while the computer is in Sleep or On state.
- Using the pull-tab, disconnect the hard-drive cable from the system board.
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
CAUTION: Hard drives are fragile. Exercise care when handling the hard drive.
CAUTION: To avoid data loss, do not remove the hard drive while the computer is in Sleep or On state.
Using the pull-tab, disconnect the hard-drive cable from the system board.
1024
Step 2
Remove the Screws
- Remove the screws that secure the hard-drive assembly to the computer base.
Remove the screws that secure the hard-drive assembly to the computer base.
Step 3
Lifting the Hard-Drive Assembly
- Gently lift the hard-drive assembly out of the computer base.
Gently lift the hard-drive assembly out of the computer base.
Step 4
Disconnecting the Interposer
- Disconnect the interposer from the hard drive.
Disconnect the interposer from the hard drive.
Step 5
Remove the Screws
- Remove the screws that secure the hard-drive bracket to the hard drive.
Remove the screws that secure the hard-drive bracket to the hard drive.
Step 6
Lifting the Hard Drive
- Lift the hard drive out of the hard-drive bracket.
Lift the hard drive out of the hard-drive bracket.
Step 7
Connecting the Interposer
- Connect the interposer to the NEW hard drive.
Connect the interposer to the NEW hard drive.
Step 8
Align the Screw Holes
- Align the screw holes on the hard drive-bracket with the screw holes on the hard drive.
Align the screw holes on the hard drive-bracket with the screw holes on the hard drive.
Step 9
Replace the Screws
- Replace the screws that secure the hard-drive bracket to the hard drive.
Replace the screws that secure the hard-drive bracket to the hard drive.
Step 10
Placing the Hard-Drive
- Place the hard-drive assembly into the hard-drive bay.
Place the hard-drive assembly into the hard-drive bay.
Step 11
Align the Screw Holes
- Align the screw holes on the hard-drive assembly with the screw holes on the computer base.
Align the screw holes on the hard-drive assembly with the screw holes on the computer base.
Step 12
Replace the Screws
- Replace the screws that secure the hard-drive assembly to the computer base.
Replace the screws that secure the hard-drive assembly to the computer base.
Step 13
Connecting the Hard-Drive Cable
- Connect the hard-drive cable to the system board.
Connect the hard-drive cable to the system board.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Terrence15
Member since: 12/18/2017
78,526 Reputation
441 Guides authored
Badges:
28
+25 more badges
Team
Informative Technologies Inc.
Member of Informative Technologies Inc.
Community
38 Members
1,980 Guides authored