Difficulty
Easy
Steps
5
Time Required
5 minutes
Sections
2
- Base Cover
- 2 steps
- Battery
- 3 steps
Flags
0
BackDell Inspiron 14-7437
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Base Cover
- Power off your Dell Inspiron 14-7437 before disassembling.
- Remove the eight 4.5 mm screws on the back panel of the device using the Phillips 1 Screwdriver.
- The two 4.5 mm screws in the center under the rubber mount cannot be removed, but can be loosened.
Power off your Dell Inspiron 14-7437 before disassembling.
Remove the eight 4.5 mm screws on the back panel of the device using the Phillips 1 Screwdriver.
The two 4.5 mm screws in the center under the rubber mount cannot be removed, but can be loosened.
1024
Step 2
- Pry open the back cover using a spudger and slide it along the under the cover.
Pry open the back cover using a spudger and slide it along the under the cover.
Step 3
Battery
- Remove the two 2.5 mm screws holding the battery in place using the J000 Phillips Head Screwdriver.
Remove the two 2.5 mm screws holding the battery in place using the J000 Phillips Head Screwdriver.
Step 4
- Disconnect the ribbon cables from the motherboard.
Disconnect the ribbon cables from the motherboard.
Step 5
- Lift up and remove the Lithium-Polymer Battery.
Lift up and remove the Lithium-Polymer Battery.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 2 other contributors
Travis Connolly
Member since: 03/09/2016
330 Reputation
2 Guides authored
Badges:
11
+8 more badges
Team
UMass Dartmouth, Team 7-8, Catania Spring 2016
Member of UMass Dartmouth, Team 7-8, Catania Spring 2016
UMASSD-CATANIA-S16S7G8
3 Members
12 Guides authored
