Difficulty

Easy

Steps

2

Time Required

                          1 minute

Sections

1

  • Base Cover
  • 2 steps

Flags

0

  • BackDell Inspiron 14-7437

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Base Cover
  • Power off your Dell Inspiron 14-7437 before disassembling.
  • Remove the eight 4.5 mm screws on the back panel of the device using the Phillips 1 Screwdriver.
  • The two 4.5 mm screws in the center under the rubber mount cannot be removed, but can be loosened.

Power off your Dell Inspiron 14-7437 before disassembling.

Remove the eight 4.5 mm screws on the back panel of the device using the Phillips 1 Screwdriver.

The two 4.5 mm screws in the center under the rubber mount cannot be removed, but can be loosened.

1024

Step 2

  • Pry open the back cover using a spudger and slide it along the under the cover.

Pry open the back cover using a spudger and slide it along the under the cover.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Travis Connolly

Member since: 03/09/2016

330 Reputation

                                      2 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       UMass Dartmouth, Team 7-8, Catania Spring 2016                        

                                                  Member of UMass Dartmouth, Team 7-8, Catania Spring 2016 



                    UMASSD-CATANIA-S16S7G8                     


                                            3 Members                     


                                            12 Guides authored