Difficulty

Moderate

Steps

7

Time Required

                          9 minutes

Sections

2

  • Battery
  • 4 steps
  • Wi-Fi Card
  • 3 steps

Flags

0

  • BackDell Inspiron 14-5447

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flip the laptop upside down to access the battery.

Flip the laptop upside down to access the battery.

1024

Step 2

  • Remove the two black 5.70mm Phillips#0 screws on the case’s back.
  • Insert a plastic opening tool into the small slit, centered between the removed screws, and pry open the back cover

Remove the two black 5.70mm Phillips#0 screws on the case’s back.

Insert a plastic opening tool into the small slit, centered between the removed screws, and pry open the back cover

Step 3

  • Remove the two 5.70mm Phillips #0 screws that secure the battery in place on its left side .
  • Treat the battery with care - puncturing or bending may cause damage to the battery and may result in fire or injury.

Remove the two 5.70mm Phillips #0 screws that secure the battery in place on its left side .

Treat the battery with care - puncturing or bending may cause damage to the battery and may result in fire or injury.

Step 4

  • Use the black, plastic flap on the left side to pull the battery out.
  • Slowly lift the flap up and the battery should slide out.

Use the black, plastic flap on the left side to pull the battery out.

Slowly lift the flap up and the battery should slide out.

Step 5

              Wi-Fi Card
  • Locate the Wifi card on the top left of the laptop.
  • Use the tweezers to release the black and white cables.

Locate the Wifi card on the top left of the laptop.

Use the tweezers to release the black and white cables.

Step 6

  • Remove one silver 2.9mm Phillips #1 screw which secures the WiFi card.

Remove one silver 2.9mm Phillips #1 screw which secures the WiFi card.

Step 7

  • The Wi-Fi card should slide out of the black socket.
  • Use tweezers to push the white part of the Wi-Fi card up towards the top of the device to remove.
  • Remove the card with the tweezers.

The Wi-Fi card should slide out of the black socket.

Use tweezers to push the white part of the Wi-Fi card up towards the top of the device to remove.

Remove the card with the tweezers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Isabella Chavez

Member since: 04/11/2017

473 Reputation

                                      4 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Eastern Washington University, Team S1-G3, Crane Spring 2017                        

                                                  Member of Eastern Washington University, Team S1-G3, Crane Spring 2017 



                    EWU-CRANE-S17S1G3                     


                                            3 Members                     


                                            5 Guides authored