Difficulty

Easy

Steps

7

Time Required

                          4 minutes

Sections

2

  • Battery
  • 4 steps
  • Keyboard
  • 3 steps

Flags

0

  • BackDell Inspiron 14-5447

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flip the laptop upside down to access the battery.

Flip the laptop upside down to access the battery.

1024

Step 2

  • Remove the two black 5.70mm Phillips#0 screws on the case’s back.
  • Insert a plastic opening tool into the small slit, centered between the removed screws, and pry open the back cover

Remove the two black 5.70mm Phillips#0 screws on the case’s back.

Insert a plastic opening tool into the small slit, centered between the removed screws, and pry open the back cover

Step 3

  • Remove the two 5.70mm Phillips #0 screws that secure the battery in place on its left side .
  • Treat the battery with care - puncturing or bending may cause damage to the battery and may result in fire or injury.

Remove the two 5.70mm Phillips #0 screws that secure the battery in place on its left side .

Treat the battery with care - puncturing or bending may cause damage to the battery and may result in fire or injury.

Step 4

  • Use the black, plastic flap on the left side to pull the battery out.
  • Slowly lift the flap up and the battery should slide out.

Use the black, plastic flap on the left side to pull the battery out.

Slowly lift the flap up and the battery should slide out.

Step 5

              Keyboard
  • Locate the five small slits at the top of the keyboard.
  • Using a plastic opening tool, carefully pry each slit to loosen the keyboard.
  • Slide the keyboard towards the screen at an angle for removal.
  • Be cautious when lifting the keyboard because there are secured, fragile wires connected underneath it.

Locate the five small slits at the top of the keyboard.

Using a plastic opening tool, carefully pry each slit to loosen the keyboard.

Slide the keyboard towards the screen at an angle for removal.

Be cautious when lifting the keyboard because there are secured, fragile wires connected underneath it.

Step 6

  • If the keyboard is not lifted with caution, damage to the cables may occur.
  • Lift the keyboard and flip it onto the mouse-pad.

If the keyboard is not lifted with caution, damage to the cables may occur.

Lift the keyboard and flip it onto the mouse-pad.

Step 7

  • Locate the two cable connectors. These connectors secure the cables to the laptop with small, securing flaps.
  • To release the cables, take each flap and flip them upwards to the unlocking position.
  • Pull both the cables out after unlocking and set aside the keyboard.

Locate the two cable connectors. These connectors secure the cables to the laptop with small, securing flaps.

To release the cables, take each flap and flip them upwards to the unlocking position.

Pull both the cables out after unlocking and set aside the keyboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 7 other contributors 


                    Miguel Vargas

Member since: 04/10/2017

107 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Eastern Washington University, Team S1-G3, Crane Spring 2017                        

                                                  Member of Eastern Washington University, Team S1-G3, Crane Spring 2017 



                    EWU-CRANE-S17S1G3                     


                                            3 Members                     


                                            5 Guides authored