Difficulty
Moderate
Steps
4
Time Required
5 minutes
Sections
1
- Battery
- 4 steps
Flags
0
BackDell Inspiron 14-5447
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Flip the laptop upside down to access the battery.
Flip the laptop upside down to access the battery.
1024
Step 2
- Remove the two black 5.70mm Phillips#0 screws on the case’s back.
- Insert a plastic opening tool into the small slit, centered between the removed screws, and pry open the back cover
Remove the two black 5.70mm Phillips#0 screws on the case’s back.
Insert a plastic opening tool into the small slit, centered between the removed screws, and pry open the back cover
Step 3
- Remove the two 5.70mm Phillips #0 screws that secure the battery in place on its left side .
- Treat the battery with care - puncturing or bending may cause damage to the battery and may result in fire or injury.
Remove the two 5.70mm Phillips #0 screws that secure the battery in place on its left side .
Treat the battery with care - puncturing or bending may cause damage to the battery and may result in fire or injury.
Step 4
- Use the black, plastic flap on the left side to pull the battery out.
- Slowly lift the flap up and the battery should slide out.
Use the black, plastic flap on the left side to pull the battery out.
Slowly lift the flap up and the battery should slide out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 8 other contributors
Isabella Chavez
Member since: 04/11/2017
473 Reputation
4 Guides authored
Badges:
11
+8 more badges
Team
Eastern Washington University, Team S1-G3, Crane Spring 2017
Member of Eastern Washington University, Team S1-G3, Crane Spring 2017
EWU-CRANE-S17S1G3
3 Members
5 Guides authored
