Dell Inspiron 14 5100 Power Adapter Port Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          2 minutes            

Sections

2

• Dell Inspiron 14 5100 Disassembly
• 2 steps
• Power Adapter Port
• 3 steps

Flags

0

• BackDell Inspiron 14 5100

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

This guide will go through the process of replacing the power adapter port for the Dell Inspiron 14 5100.

A faulty power adapter port can cause your device to never be charge or randomly shut down due to the lack of connection between the charger and the battery and to the motherboard.

If this guide is unnecessary, go to our device page to look for the correct guide for your situation.

What you need

Step 1

              Dell Inspiron 14 5100 Disassembly               

• Make sure to disconnect the power source to the device.
• Remove nine screws securing the base cover of the laptop’s keyboard assembly using the Phillips #0 screwdriver.
• There are 2 sets of screws.
• Remove the 3 captive screws.
• Remove the 6M2*6 screws.

Make sure to disconnect the power source to the device.

Remove nine screws securing the base cover of the laptop’s keyboard assembly using the Phillips #0 screwdriver.

There are 2 sets of screws.

Remove the 3 captive screws.

Remove the 6M2*6 screws.

1024

Step 2

• Pry open the laptop to separate the base cover from the keyboard assembly.
• You may use your fingertips or use plastic opening tools.

Pry open the laptop to separate the base cover from the keyboard assembly.

You may use your fingertips or use plastic opening tools.

Step 3

              Power Adapter Port               

• Disconnect the power-adapter port cable from the motherboard.

Disconnect the power-adapter port cable from the motherboard.

Step 4

• Remove the two screws securing the power adapter port to the keyboard assembly using the Phillips #0 screwdriver.

Remove the two screws securing the power adapter port to the keyboard assembly using the Phillips #0 screwdriver.

Step 5

• Remove the power adapter port and remove it from the device.

Remove the power adapter port and remove it from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Ting-Hao Lao                     

Member since: 09/17/2019

582 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Embry-Riddle Aeronautical University, Team S15-G2, Lamothe Fall 2019                        

                                                  Member of Embry-Riddle Aeronautical University, Team S15-G2, Lamothe Fall 2019 



                    ERAU-LAMOTHE-F19S15G2                     


                                            4 Members                     


                                            6 Guides authored