Difficulty

Easy

Steps

12

Time Required

                          5 - 20 minutes

Sections

1

  • Display Assembly
  • 12 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Inspiron 14 3459

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Sliding the Antenna Cables
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
  • Close the display and turn the computer over.
  • Slide the antenna cables into the slot on the computer base.

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

Close the display and turn the computer over.

Slide the antenna cables into the slot on the computer base.

1024

Step 2

              Disconnecting the I/O Board Cable
  • Turn the computer over and open the display.
  • Open the latch and disconnect the I/O-board cable from the I/O board.

Turn the computer over and open the display.

Open the latch and disconnect the I/O-board cable from the I/O board.

Step 3

              Removing the Board Cable
  • Remove the I/O-board cable from the computer base.

Remove the I/O-board cable from the computer base.

Step 4

              Remove the Antenna Cables
  • Note the antenna cable routing and remove the antenna cables from the routing guides on the computer base.

Note the antenna cable routing and remove the antenna cables from the routing guides on the computer base.

Step 5

              Note the Routing
  • Note the display cable routing and remove the cable from its routing guides on the computer base.

Note the display cable routing and remove the cable from its routing guides on the computer base.

Step 6

              Remove the Screws
  • Remove the screws that secure the display hinges to the computer base.

Remove the screws that secure the display hinges to the computer base.

Step 7

              Lift the Display Assembly
  • Lift the display assembly off the computer base.

Lift the display assembly off the computer base.

Step 8

              Align the Screw Holes
  • Align the screw holes on the display hinges with the screw holes on the computer base.

Align the screw holes on the display hinges with the screw holes on the computer base.

Step 9

              Replace the Screws
  • Replace the screws that secure the display hinges to the computer base.

Replace the screws that secure the display hinges to the computer base.

Step 10

              Route the Display Cable
  • Route the display cable through the routing guides on the computer base.

Route the display cable through the routing guides on the computer base.

Step 11

              Route the Antenna Cables
  • Route the antenna cables through the routing guides on the computer base and slide the antenna cables through the slot on the computer base.

Route the antenna cables through the routing guides on the computer base and slide the antenna cables through the slot on the computer base.

Step 12

              Sliding the I/O Board Cable
  • Slide the I/O-board cable into the I/O board and close the latch to secure the cable.

Slide the I/O-board cable into the I/O board and close the latch to secure the cable.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Terrence15

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored