Dell Inspiron 13Z N301Z Display Assembly Replacement Repair Guide

Difficulty

Easy

Steps

9

Time Required

                          5 - 7 minutes            

Sections

1

• Display Assembly
• 9 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackDell Inspiron 13z N301z

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Disconnecting the Antenna Cables               

• Follow the instructions in Before You Begin.
• Turn the computer over.
• Disconnect the Mini-Card antenna cables from the computer base.

Follow the instructions in Before You Begin.

Turn the computer over.

Disconnect the Mini-Card antenna cables from the computer base.

1024

Step 2

              Opening the Display               

• Turn the computer over and open the display as far as possible.

Turn the computer over and open the display as far as possible.

Step 3

              Disconnecting the Display Cable               

• Disconnect the display cable and the camera cable from their connectors on the system board.

Disconnect the display cable and the camera cable from their connectors on the system board.

Step 4

              Removing the Cables               

• Make a note of the routing of the Mini-Card antenna cables and remove the cables from the routing guides.

Make a note of the routing of the Mini-Card antenna cables and remove the cables from the routing guides.

Step 5

              Remove the Screws               

• Remove the six screws (three on each side) that secure the display assembly to the computer base.

Remove the six screws (three on each side) that secure the display assembly to the computer base.

Step 6

              Removing the Display Assembly               

• Lift and remove the display assembly off the computer base.

Lift and remove the display assembly off the computer base.

Step 7

              Placing the Display Assembly               

• Place the NEW display assembly in position and replace the six screws (three on each side) that secure the display assembly to the computer base.

Place the NEW display assembly in position and replace the six screws (three on each side) that secure the display assembly to the computer base.

Step 8

              Routing the Antenna Cables               

• Route the Mini-Card antenna cables through the slot on the computer base.

Route the Mini-Card antenna cables through the slot on the computer base.

Step 9

              Connecting the Cables               

• Connect the display cable and the camera cable to their connectors on the system board.

Connect the display cable and the camera cable to their connectors on the system board.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Terrence15                     

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges                           

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored