Dell Inspiron 13Z 5323 Power Button Replacement Repair Guide

Difficulty

Moderate

Steps

3

Time Required

Suggest a time??

Sections

1

• Power button
• 3 steps

Flags

2

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackDell Inspiron 13z 5323

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Power button               

• Remove nine screws from the bottom case.
• Loosen the single captive screw on the base cover.
• The screw in the base cover will stay inside the hole because it is held in by a small washer.

Remove nine screws from the bottom case.

Loosen the single captive screw on the base cover.

The screw in the base cover will stay inside the hole because it is held in by a small washer.

1024

Step 2

• There are 3 slots on the top of the keyboard where you will have to use a thin tool, such as a small flathead screwdriver to push the tabs so the keyboard will pop out.
• You will have to flip a small tab up where the ribbon connector goes into the insert, so the connector can be released and the keyboard can be removed.

There are 3 slots on the top of the keyboard where you will have to use a thin tool, such as a small flathead screwdriver to push the tabs so the keyboard will pop out.

You will have to flip a small tab up where the ribbon connector goes into the insert, so the connector can be released and the keyboard can be removed.

Step 3

• Unscrew the highlighted screw and slide out the power button assembly.
• Separate the palm rest from the base of the device using the blue separating tool. Before separating the palm rest from the device make sure to release all visible ribbon connectors.
• Flip the palm rest over and you will notice the power button assembly in the top right corner of the palm rest.

Unscrew the highlighted screw and slide out the power button assembly.

Separate the palm rest from the base of the device using the blue separating tool. Before separating the palm rest from the device make sure to release all visible ribbon connectors.

Flip the palm rest over and you will notice the power button assembly in the top right corner of the palm rest.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    David Gilleran                     

Member since: 03/08/2017

201 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       UMass Dartmouth, Team S5-G6, Botvin Spring 2017                        

                                                  Member of UMass Dartmouth, Team S5-G6, Botvin Spring 2017 



                    UMASSD-BOTVIN-S17S5G6                     


                                            3 Members                     


                                            4 Guides authored                     

Matthew Coughlin - Apr 24, 2017

Reply

this guide has no descriptions on what is going feels incomplete.