Difficulty

Easy

Steps

4

Time Required

                          50 seconds - 4 minutes

Sections

1

  • Memory Module
  • 4 steps

Flags

2

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Inspiron 13z 5323

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Step 1

              Popping up the Memory Module
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in “Before You Begin”.
  • CAUTION: To prevent damage to the memory-module connector, do not use tools to spread the memory-module securing clips.
  • Close the display and turn the computer over.
  • Use your fingertips to carefully spread apart the securing clips on each end of the memory-module connector until the memory module pops up.

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in “Before You Begin”.

CAUTION: To prevent damage to the memory-module connector, do not use tools to spread the memory-module securing clips.

Close the display and turn the computer over.

Use your fingertips to carefully spread apart the securing clips on each end of the memory-module connector until the memory module pops up.

1024

Step 2

              Removing the Memory Module
  • Remove the memory module from the memory-module connector.

Remove the memory module from the memory-module connector.

Step 3

              Align the Notch
  • CAUTION: If you need to install memory modules in two connectors, install a memory module in the connector labeled “DIMM A” before you install a memory module in the connector labeled “DIMM B.”
  • Align the notch on the memory module with the tab on the memory-module connector.

CAUTION: If you need to install memory modules in two connectors, install a memory module in the connector labeled “DIMM A” before you install a memory module in the connector labeled “DIMM B.”

Align the notch on the memory module with the tab on the memory-module connector.

Step 4

              Installing the Memory Module
  • Slide the memory module firmly into the connector at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear the click, remove the memory module and reinstall it.
  • NOTE: If the memory module is not in stalled properly, the computer may not boot.

Slide the memory module firmly into the connector at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear the click, remove the memory module and reinstall it.

NOTE: If the memory module is not in stalled properly, the computer may not boot.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Terrence15

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored