Difficulty

Very easy

Steps

4

Time Required

                          30 seconds - 2 minutes

Sections

1

  • Memory Module
  • 4 steps

Flags

2

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Inspiron 1320

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Step 1

              Popping up the Memory Module
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.
  • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
  • CAUTION: To prevent damage to the memory module connector, do not use tools to spread the memory module securing clips.
  • Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the memory module pops up.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

CAUTION: To prevent damage to the memory module connector, do not use tools to spread the memory module securing clips.

Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the memory module pops up.

1024

Step 2

              Removing the Memory Module
  • Remove the memory module from the memory module connector.

Remove the memory module from the memory module connector.

Step 3

              Align the Notch
  • Align the notch in the NEW memory module with the tab in the memory module connector.

Align the notch in the NEW memory module with the tab in the memory module connector.

Step 4

              Sliding the Memory Module
  • Slide the memory module firmly into the slot at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear the click, remove the memory module and reinstall it.
  • NOTE: If the memory module is not installed properly, the computer may not boot.

Slide the memory module firmly into the slot at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear the click, remove the memory module and reinstall it.

NOTE: If the memory module is not installed properly, the computer may not boot.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Terrence15

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored