Dell Inspiron 1320 Display Assembly Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          2 - 7 minutes            

Sections

1

• Display Assembly
• 7 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackDell Inspiron 1320

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Disconnecting the Display Cable               

• WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.
• CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer)
• Disconnect the display cable and the camera cable from their respective system board connectors.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer)

Disconnect the display cable and the camera cable from their respective system board connectors.

1024

Step 2

              Remove the Screws               

• Remove the six screws (three on each side) that secure the display assembly to the computer base.

Remove the six screws (three on each side) that secure the display assembly to the computer base.

Step 3

              Dislodging the Antenna Cables               

• Make note of the cable routing and carefully dislodge the Mini-Card antenna cables from the routing guides.

Make note of the cable routing and carefully dislodge the Mini-Card antenna cables from the routing guides.

Step 4

              Lifting the Display Asssembly               

• Lift the display assembly off the computer.

Lift the display assembly off the computer.

Step 5

              Placing the Display Assembly               

• Place the NEW display assembly in position and replace the six screws (three on each side) of the display assembly.

Place the NEW display assembly in position and replace the six screws (three on each side) of the display assembly.

Step 6

              Routing the Antenna Cables               

• Route the Mini-Card antenna cables through the routing guides.

Route the Mini-Card antenna cables through the routing guides.

Step 7

              Connecting the Display Cable               

• Connect the display cable and the camera cable to their respective system board connectors.

Connect the display cable and the camera cable to their respective system board connectors.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Terrence15                     

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges                           

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored