Difficulty
Easy
Steps
10
Time Required
7 - 10 minutes
Sections
1
- Display Assembly
- 10 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackDell Inspiron 13R (N3010)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove the Screws
- WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.
- CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
- Remove the two screws on the bottom of the computer that secure the display assembly to the computer base.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
Remove the two screws on the bottom of the computer that secure the display assembly to the computer base.
1024
Step 2
Disconnecting the Display Cable
- Open the display as far as possible.
- Pull the pull-tab to disconnect the display cable from the connector on the system board.
Open the display as far as possible.
Pull the pull-tab to disconnect the display cable from the connector on the system board.
Step 3
Remove the Display Cable
- Remove the display cable grounding screw.
- NOTE: Open the display at a 90-degree angle to the plane.
Remove the display cable grounding screw.
NOTE: Open the display at a 90-degree angle to the plane.
Step 4
Remove the Screws
- In sequential order (indicated on the display hinge), remove the four screws that secure the display assembly to the computer base.
In sequential order (indicated on the display hinge), remove the four screws that secure the display assembly to the computer base.
Step 5
Lifting the Display Assembly
- Lift the display assembly off the computer.
Lift the display assembly off the computer.
Step 6
Placing the Display Assembly
- Place the NEW display assembly in position.
Place the NEW display assembly in position.
Step 7
Replace the Screws
- In sequential order (indicated on the display hinge), replace the four screws that secure the display assembly to the computer base.
In sequential order (indicated on the display hinge), replace the four screws that secure the display assembly to the computer base.
Step 8
Connecting the Display Cable
- Connect the display cable to the connector on the system board.
Connect the display cable to the connector on the system board.
Step 9
Replace the Display Cable
- Replace the display cable grounding screw.
Replace the display cable grounding screw.
Step 10
Replace the Screws
- Turn the computer over and replace the two screws that secure the display assembly to the computer base.
Turn the computer over and replace the two screws that secure the display assembly to the computer base.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Terrence15
Member since: 12/18/2017
78,526 Reputation
441 Guides authored
Badges:
28
+25 more badges
Team
Informative Technologies Inc.
Member of Informative Technologies Inc.
Community
38 Members
1,980 Guides authored
