Dell Inspiron 13 7373 Daughterboard Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          15 minutes            

Sections

3

• Back Cover
• 1 step
• Network Card
• 1 step
• Daughterboard
• 2 steps

Flags

2

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackDell Inspiron 13-7373

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Back Cover               

• Before you begin, be sure to turn off your laptop and unplug it from the outlet.
• Remove the ten 7.5mm Phillips #00 screws from the bottom of the laptop.
• Use an opening tool to remove the bottom half of the case from the laptop.

Before you begin, be sure to turn off your laptop and unplug it from the outlet.

Remove the ten 7.5mm Phillips #00 screws from the bottom of the laptop.

Use an opening tool to remove the bottom half of the case from the laptop.

1024

Step 2

              Network Card               

• Use the Phillips #00 screwdriver to remove the single screw holding in the network card.
• Remove the network card from the laptop.

Use the Phillips #00 screwdriver to remove the single screw holding in the network card.

Remove the network card from the laptop.

Step 3

              Daughterboard               

• Use the Phillips #00 screwdriver to remove the two 1mm screws holding in the daughterboard.
• Remove the metal piece holding in the daughterboard.
• Disconnect the two cable connectors from the daughterboard.
• If the cables are stuck, gently wiggle them until they disconnect.

Use the Phillips #00 screwdriver to remove the two 1mm screws holding in the daughterboard.

Remove the metal piece holding in the daughterboard.

Disconnect the two cable connectors from the daughterboard.

If the cables are stuck, gently wiggle them until they disconnect.

Step 4

• Remove the daughterboard.

Remove the daughterboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Kristen Gismondi                     

Member since: 11/12/2014

69,395 Reputation

                                      176 Guides authored                  



                       Badges:
                       44







                                                        +41 more badges                           

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,769 Guides authored