Difficulty

Easy

Steps

13

Time Required

                          10 - 40 minutes

Sections

2

  • Battery
  • 7 steps
  • Memory Modules
  • 6 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Inspiron 13 7368

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Disconnecting the Battery Cable
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
  • Disconnect the battery cable from the system board.

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

Disconnect the battery cable from the system board.

1024

Step 2

              Remove the Screws
  • Remove the screws that secure the battery to the palm-rest assembly.

Remove the screws that secure the battery to the palm-rest assembly.

Step 3

              Lifting the Battery
  • Lift the battery off the palm-rest assembly.

Lift the battery off the palm-rest assembly.

Step 4

              Grounding the System Board
  • Press and hold the power button for five seconds to ground the system board.

Press and hold the power button for five seconds to ground the system board.

Step 5

              Align the Screw Holes
  • Align the screw holes on the battery with the screw holes on the palm-rest assembly.

Align the screw holes on the battery with the screw holes on the palm-rest assembly.

Step 6

              Replace the Screws
  • Replace the screws that secure the battery to the palm-rest assembly.

Replace the screws that secure the battery to the palm-rest assembly.

Step 7

              Connecting the Battery Cable
  • Connect the battery cable to the system board.

Connect the battery cable to the system board.

Step 8

              Lifting the Mylar
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
  • Lift the Mylar to access the memory module.

Lift the Mylar to access the memory module.

Step 9

              Popping up the Memory Module
  • Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot until the memory module pops up.

Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot until the memory module pops up.

Step 10

              Removing the Memory Module
  • Remove the memory module from the memory-module slot.

Remove the memory module from the memory-module slot.

Step 11

              Lifting the Mylar
  • Lift the Mylar to access the memory-module slot.

Lift the Mylar to access the memory-module slot.

Step 12

              Align the Notch
  • Align the notch on the memory module with the tab on the memory-module slot.

Align the notch on the memory module with the tab on the memory-module slot.

Step 13

              Sliding the Memory Module
  • Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.
  • NOTE: If you do not hear the click, remove the memory module and reinstall it.

Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.

NOTE: If you do not hear the click, remove the memory module and reinstall it.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Terrence15

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored