Difficulty

Easy

Steps

10

Time Required

                          25 - 40 minutes

Sections

1

  • Display Assembly
  • 10 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Inspiron 13 7368

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Peeling the Tape
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
  • Peel off the pieces of tape that secure the display cable and touch-screen board-cable to the system board.

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

Peel off the pieces of tape that secure the display cable and touch-screen board-cable to the system board.

1024

Step 2

              Disconnecting the Display Cable
  • Open the latches to disconnect the display cable and the touch-screen board-cable from the system board.

Open the latches to disconnect the display cable and the touch-screen board-cable from the system board.

Step 3

              Open the Display
  • Turn the computer over and open the display as far as possible.
  • CAUTION: Place the computer on a soft and clean surface to avoid scratching the display.

Turn the computer over and open the display as far as possible.

CAUTION: Place the computer on a soft and clean surface to avoid scratching the display.

Step 4

              Remove the Screws
  • Remove the screws that secure the display assembly to the palm-rest assembly.

Remove the screws that secure the display assembly to the palm-rest assembly.

Step 5

              Lifting the Display Assembly
  • Lift the display assembly off the palm-rest assembly.
  • CAUTION: Place the computer on a soft and clean surface to avoid scratching the display.

Lift the display assembly off the palm-rest assembly.

Step 6

              Placing the Display Assembly
  • Place the display assembly face down on the palm-rest assembly.

Place the display assembly face down on the palm-rest assembly.

Step 7

              Align the Screw Holes
  • Align the screw holes on the display hinges with the screw holes on the palm-rest assembly.

Align the screw holes on the display hinges with the screw holes on the palm-rest assembly.

Step 8

              Replace the Screws
  • Replace the screws that secure the display assembly to the palm-rest assembly.

Replace the screws that secure the display assembly to the palm-rest assembly.

Step 9

              Sliding the Display Cable
  • Close the display and turn the computer over.
  • Slide the display cable and the touch-screen board-cable into their respective connectors on the system board and close the latches to secure the cables.

Close the display and turn the computer over.

Slide the display cable and the touch-screen board-cable into their respective connectors on the system board and close the latches to secure the cables.

Step 10

              Adhering the Tape
  • Adhere the pieces of tape that secure the display cable and the touch-screen board-cable to their respective connectors on the system board.

Adhere the pieces of tape that secure the display cable and the touch-screen board-cable to their respective connectors on the system board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Terrence15

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored