Difficulty

Moderate

Steps

7

Time Required

                          20 - 25 minutes

Sections

2

  • Battery
  • 4 steps
  • Speaker
  • 3 steps

Flags

0

  • BackDell Inspiron 13-7359

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • First flip over the laptop to expose the back panel
  • Use a Phillips #0 screwdriver to unscrew all ten 7mm Phillips head screws holding the back panel in place.

First flip over the laptop to expose the back panel

Use a Phillips #0 screwdriver to unscrew all ten 7mm Phillips head screws holding the back panel in place.

1024

Step 2

  • With a plastic spudger, carefully remove the back panel by prying each corner off individually
  • Slowly pick up the panel and set it aside

With a plastic spudger, carefully remove the back panel by prying each corner off individually

Slowly pick up the panel and set it aside

Step 3

  • The battery will be the largest black component in the device located near the bottom edge. Using a Phillips #0 screwdriver, unscrew the two 3mm Phillips head screws holding in the battery.

The battery will be the largest black component in the device located near the bottom edge. Using a Phillips #0 screwdriver, unscrew the two 3mm Phillips head screws holding in the battery.

Step 4

  • To remove the old battery, slightly lift the bottom edge of the battery with your hands
  • Now slowly pull the battery towards you to fully detach the battery

To remove the old battery, slightly lift the bottom edge of the battery with your hands

Now slowly pull the battery towards you to fully detach the battery

Step 5

              Speaker
  • Following the removal of the Battery, remove the left speaker.
  • As you lift the left speaker, carefully lift the wire that connects the left and right speakers.

Following the removal of the Battery, remove the left speaker.

As you lift the left speaker, carefully lift the wire that connects the left and right speakers.

Step 6

  • Disconnect the small wires attached to the top of the right side speaker as marked in the photo.

Disconnect the small wires attached to the top of the right side speaker as marked in the photo.

Step 7

  • Use the plastic spudger to safely and easily detach the right speaker from the device.
  • Lift the right speaker out to complete the removal.

Use the plastic spudger to safely and easily detach the right speaker from the device.

Lift the right speaker out to complete the removal.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Katie Ragsdale

Member since: 01/30/2018

183 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Baylor, Team S1-G6, Johnson Spring 2018                        

                                                  Member of Baylor, Team S1-G6, Johnson Spring 2018 



                    BU-JOHNSON-S18S1G6                     


                                            3 Members                     


                                            5 Guides authored