Difficulty
Easy
Steps
4
Time Required
5 - 10 minutes
Sections
2
- Back Cover
- 2 steps
- Hard Drive
- 2 steps
Flags
0
BackDell Inspiron 13-7359
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Flip your device over so the back cover is facing you.
- Using a Phillips #0 Screwdriver, remove the ten 7mm screws holding the back cover in place.
Flip your device over so the back cover is facing you.
Using a Phillips #0 Screwdriver, remove the ten 7mm screws holding the back cover in place.
1024
Step 2
- Insert a plastic opening and run it along the edge of the back cover. Do this until the entire back cover can be removed.
Insert a plastic opening and run it along the edge of the back cover. Do this until the entire back cover can be removed.
Step 3
Hard Drive
- Unscrew and remove the 2 of the 3mm Phillips head screws holding the hard drive in place.
Unscrew and remove the 2 of the 3mm Phillips head screws holding the hard drive in place.
Step 4
- Lift and hold the hard drive in your left hand.
- Use your right hand to grab hold of the black wire connector attached on the right of the hard drive.
- Carefully pull the connector away from the hard drive to completely disconnect from the laptop.
Lift and hold the hard drive in your left hand.
Use your right hand to grab hold of the black wire connector attached on the right of the hard drive.
Carefully pull the connector away from the hard drive to completely disconnect from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
Author
with 3 other contributors
Valentin Medina
Member since: 01/30/2018
658 Reputation
3 Guides authored
Badges:
12
+9 more badges
Team
Baylor, Team S1-G6, Johnson Spring 2018
Member of Baylor, Team S1-G6, Johnson Spring 2018
BU-JOHNSON-S18S1G6
3 Members
5 Guides authored
