Difficulty

Easy

Steps

5

Time Required

                          7 minutes

Sections

2

  • Battery
  • 3 steps
  • Hard Drive
  • 2 steps

Flags

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackDell Inspiron 13-7352

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Before you begin, be sure to turn off your laptop and unplug it from the outlet.
  • Use a Phillips screwdriver to remove the ten 7.5mm screws that securing the back panel.
  • Use the plastic opening tool to pry up and loosen the back panel.
  • Remove the back panel.

Before you begin, be sure to turn off your laptop and unplug it from the outlet.

Use a Phillips screwdriver to remove the ten 7.5mm screws that securing the back panel.

Use the plastic opening tool to pry up and loosen the back panel.

Remove the back panel.

1024

Step 2

  • Use a Phillips screwdriver to remove the two 3 mm screws securing the battery.
  • Unclip the hard drive wire from the battery.

Use a Phillips screwdriver to remove the two 3 mm screws securing the battery.

Unclip the hard drive wire from the battery.

Step 3

  • Gently remove the battery from the rest of the device.

Gently remove the battery from the rest of the device.

Step 4

              Hard Drive
  • Locate the Hard Drive.
  • Remove the two 3mm screws from Hard Drive with the Phillips #0 head.
  • Disconnect the wire attached to the system board by lifting up the tape.
  • Remove the tape tab from the Hard Drive by lifting the tape up and off of the Hard Drive unit.

Locate the Hard Drive.

Remove the two 3mm screws from Hard Drive with the Phillips #0 head.

Disconnect the wire attached to the system board by lifting up the tape.

Remove the tape tab from the Hard Drive by lifting the tape up and off of the Hard Drive unit.

Step 5

  • Once disconnected from the tape and the connector is free, lift the Hard Drive unit from the rest of the device by grasping each side with thumb and index or middle finger.

Once disconnected from the tape and the connector is free, lift the Hard Drive unit from the rest of the device by grasping each side with thumb and index or middle finger.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 4 other contributors 


                    Chase Sparkman

Member since: 09/30/2015

506 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       University of Tampa, Team 1-5, Whiteside Fall 2015                        

                                                  Member of University of Tampa, Team 1-5, Whiteside Fall 2015 



                    UT-WHITESIDE-F15S1G5                     


                                            3 Members                     


                                            6 Guides authored