Dell Inspiron 13 7352 Cooling Fan Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          7 minutes            

Sections

2

• Battery
• 3 steps
• Cooling Fan
• 3 steps

Flags

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackDell Inspiron 13-7352

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Before you begin, be sure to turn off your laptop and unplug it from the outlet.
• Use a Phillips screwdriver to remove the ten 7.5mm screws that securing the back panel.
• Use the plastic opening tool to pry up and loosen the back panel.
• Remove the back panel.

Before you begin, be sure to turn off your laptop and unplug it from the outlet.

Use a Phillips screwdriver to remove the ten 7.5mm screws that securing the back panel.

Use the plastic opening tool to pry up and loosen the back panel.

Remove the back panel.

1024

Step 2

• Use a Phillips screwdriver to remove the two 3 mm screws securing the battery.
• Unclip the hard drive wire from the battery.

Use a Phillips screwdriver to remove the two 3 mm screws securing the battery.

Unclip the hard drive wire from the battery.

Step 3

• Gently remove the battery from the rest of the device.

Gently remove the battery from the rest of the device.

Step 4

              Cooling Fan               

• Remove the cord that runs from system board to the I/O board.

Remove the cord that runs from system board to the I/O board.

Step 5

• Remove the 3mm and 4mm screws holding down fan with the Phillips #0 head.
• Disconnect the fan wire from the system board.

Remove the 3mm and 4mm screws holding down fan with the Phillips #0 head.

Disconnect the fan wire from the system board.

Step 6

• Lift the fan from the rest of the device by picking up a single side and separating it from device.

Lift the fan from the rest of the device by picking up a single side and separating it from device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 

                    Chris Monte                     

Member since: 09/30/2015

393 Reputation

                                      2 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       University of Tampa, Team 1-5, Whiteside Fall 2015                        

                                                  Member of University of Tampa, Team 1-5, Whiteside Fall 2015 



                    UT-WHITESIDE-F15S1G5                     


                                            3 Members                     


                                            6 Guides authored