Dell Inspiron 13 7347 Display Assembly Replacement Repair Guide

Difficulty

Moderate

Steps

14

Time Required

                          15 minutes            

Sections

4

• Battery
• 4 steps
• Fan
• 5 steps
• Hard Drive
• 1 step
• Display Assembly
• 4 steps

Flags

2

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackDell Inspiron 13-7347

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Flip the device over, so that the back is facing up.
• Remove the ten, 7 mm, Phillips #1 screws on the back of your Dell Inspiron 13-7347.
• Use the suction cup to lift off the back case.

Flip the device over, so that the back is facing up.

Remove the ten, 7 mm, Phillips #1 screws on the back of your Dell Inspiron 13-7347.

Use the suction cup to lift off the back case.

1024

Step 2

• Remove the three 4 mm JIS #00 screws that secure the battery to the device.

Remove the three 4 mm JIS #00 screws that secure the battery to the device.

Step 3

• Unplug the flat connector that is connected to the battery.

Unplug the flat connector that is connected to the battery.

Step 4

• Lift the battery steadily from the device.
• Tilt the battery upward while removing.

Lift the battery steadily from the device.

Tilt the battery upward while removing.

Step 5

              Fan               

• You should be able to identify the fan.
• This is the 2.5 mm JIS #00 screw.
• This is the 4 mm JIS #00 screw.

You should be able to identify the fan.

This is the 2.5 mm JIS #00 screw.

This is the 4 mm JIS #00 screw.

Step 6

• Remove the 2.5 mm JIS #00 screw.
• Remove the 4 mm JIS #00 screw.

Remove the 2.5 mm JIS #00 screw.

Remove the 4 mm JIS #00 screw.

Step 7

• Detach the cable that connects the fan and the motherboard.
• The cable is extremely fragile.

Detach the cable that connects the fan and the motherboard.

The cable is extremely fragile.

Step 8

• Detach the cord that connects the fan and the motherboard.

Detach the cord that connects the fan and the motherboard.

Step 9

• Remove the fan.

Remove the fan.

Step 10

              Hard Drive               

• Using a Phillips #0 screwdriver, loosen and remove the two 3.0 mm hard drive screws.
• Lift the hard drive up and out of the device.

Using a Phillips #0 screwdriver, loosen and remove the two 3.0 mm hard drive screws.

Lift the hard drive up and out of the device.

Step 11

              Display Assembly               

• Using a Phillips #0 screwdriver, remove the three 3.0 mm heat sink screws.
• Remove the Heat Sink.
• When reinstalling the heat sink, be sure to clean both contact surfaces with isopropyl alcohol and reapply thermal paste.

Using a Phillips #0 screwdriver, remove the three 3.0 mm heat sink screws.

Remove the Heat Sink.

When reinstalling the heat sink, be sure to clean both contact surfaces with isopropyl alcohol and reapply thermal paste.

Step 12

• Using a Phillips #0 screwdriver, remove the two 5.0 mm screws on the metal bracket.
• Remove the metal bracket.

Using a Phillips #0 screwdriver, remove the two 5.0 mm screws on the metal bracket.

Remove the metal bracket.

Step 13

• Loosen and reposition the display cable.
• The display cable will not be removed. Do not attempt to remove the display cable.

Loosen and reposition the display cable.

The display cable will not be removed. Do not attempt to remove the display cable.

Step 14

• Using a Phillips #0 screwdriver, remove the 5.0mm screw on the left display hinge bracket.
• Using a Phillips #0 screwdriver, remove the two 5.0mm screws on the right display hinge bracket.
• Lift and remove the display assembly.

Using a Phillips #0 screwdriver, remove the 5.0mm screw on the left display hinge bracket.

Using a Phillips #0 screwdriver, remove the two 5.0mm screws on the right display hinge bracket.

Lift and remove the display assembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Kyle Smith                     

Member since: 10/02/2019

331 Reputation

                                      3 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       The Citadel Military College of South Carolina, Team S2-G8, Eggleston Fall 2019                        

                                                  Member of The Citadel Military College of South Carolina, Team S2-G8, Eggleston Fall 2019 



                    CMCSC-EGGLESTON-F19S2G8                     


                                            2 Members                     


                                            3 Guides authored