Difficulty
Moderate
Steps
6
Time Required
10 minutes
Sections
1
- Wifi Adapter
- 6 steps
Flags
0
BackDell Inspiron 13-5368
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Wifi Adapter
- Use a Phillips #0 screwdriver to remove the 9.6 mm screws securing the back plate of the laptop.
Use a Phillips #0 screwdriver to remove the 9.6 mm screws securing the back plate of the laptop.
1024
Step 2
- Use a prying tool to remove the back plate.
Use a prying tool to remove the back plate.
Step 3
- Use a Phillips #0 screwdriver to remove the three 3 mm screws holding the battery in place.
Use a Phillips #0 screwdriver to remove the three 3 mm screws holding the battery in place.
Step 4
- Disconnect the cable connecting the battery to the motherboard, and then remove the battery
Disconnect the cable connecting the battery to the motherboard, and then remove the battery
Step 5
- Use a Phillips #0 screwdriver to remove the 3mm screw and the metal bracket that holds the network adapter card in place.
Use a Phillips #0 screwdriver to remove the 3mm screw and the metal bracket that holds the network adapter card in place.
Step 6
- Pull out the network card.
- To completely remove the network card, disconnect the two cords (white and black) from the adapter card. White on 1 and Black on 2.
Pull out the network card.
To completely remove the network card, disconnect the two cords (white and black) from the adapter card. White on 1 and Black on 2.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Raj Dhavalikar
Member since: 11/10/2018
136 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
IUPUI, Team S4-G4, Wilson Fall 2018
Member of IUPUI, Team S4-G4, Wilson Fall 2018
IUPUI-WILSON-F18S4G4
4 Members
2 Guides authored
