Difficulty
Moderate
Steps
12
Time Required
30 - 35 minutes
Sections
3
- Battery
- 5 steps
- Screen Display
- 5 steps
- Webcam
- 2 steps
Flags
1
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackDell Inspiron 13-5368
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove the nine 6mm Phillips #0 screws that secure the back cover of the laptop.
Remove the nine 6mm Phillips #0 screws that secure the back cover of the laptop.
1024
Step 2
- Use a spudger to pry up and remove the back cover.
Use a spudger to pry up and remove the back cover.
Step 3
- Remove the four 3mm Phillips #0 screws at the corners of the battery that secure it to the laptop.
Remove the four 3mm Phillips #0 screws at the corners of the battery that secure it to the laptop.
Step 4
- Pull the battery cable’s black tab towards the battery to disconnect it from the motherboard.
- Pull the tab parallel to the motherboard, not straight up.
Pull the battery cable’s black tab towards the battery to disconnect it from the motherboard.
Pull the tab parallel to the motherboard, not straight up.
Step 5
- Remove the battery.
Remove the battery.
Step 6
Screen Display
- Unscrew the 2mm screw that holds the WLAN card. Then carefully remove the WLAN card from the motherboard.
Unscrew the 2mm screw that holds the WLAN card. Then carefully remove the WLAN card from the motherboard.
Step 7
- Detach the black and white antenna cables from the WLAN card.
Detach the black and white antenna cables from the WLAN card.
Step 8
- Unplug the two display cables.
Unplug the two display cables.
Step 9
- Unscrew the screws that are securing the laptop’s hinges.
Unscrew the screws that are securing the laptop’s hinges.
Step 10
- Detach the display from the base.
Detach the display from the base.
Step 11
Webcam
- Use your plastic opening tool to pry the LCD back cover from the display panel.
Use your plastic opening tool to pry the LCD back cover from the display panel.
Step 12
- Carefully separate the back cover from the LCD screen.
- Carefully remove the ribbon cable that holds the webcam to the screen, then unplug the webcam from the ribbon cable.
Carefully separate the back cover from the LCD screen.
Carefully remove the ribbon cable that holds the webcam to the screen, then unplug the webcam from the ribbon cable.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Matt Sugrim
Member since: 09/27/2017
997 Reputation
6 Guides authored
Badges:
12
+9 more badges
Team
USF Tampa, Team S14-G6, Boczar Fall 2017
Member of USF Tampa, Team S14-G6, Boczar Fall 2017
USFT-BOCZAR-F17S14G6
4 Members
8 Guides authored