Difficulty

Easy

Steps

8

Time Required

                          15 - 40 minutes

Sections

1

  • Display Assembly
  • 8 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Inspiron 13 1370

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Dislodging the Antenna Cables
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.
  • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface.
  • Make a note of the Mini-Card antenna cable routing and carefully dislodge the antenna cables from the routing guides on the computer base. Pull the cables away so that they are clear of the computer base.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface.

Make a note of the Mini-Card antenna cable routing and carefully dislodge the antenna cables from the routing guides on the computer base. Pull the cables away so that they are clear of the computer base.

1024

Step 2

              Removing the Screws
  • Remove the four screws that secure the display assembly to the computer base.

Remove the four screws that secure the display assembly to the computer base.

Step 3

              Sliding the Hinges
  • Slide the hinges out of the slots in the computer base.

Slide the hinges out of the slots in the computer base.

Step 4

              Lifting the Display Assembly
  • Lift the display assembly off the computer base.

Lift the display assembly off the computer base.

Step 5

              Sliding the Tabs
  • Slide the tabs on the display hinges into the slots in the computer base.

Slide the tabs on the display hinges into the slots in the computer base.

Step 6

              Align the Display Assembly
  • Align the display assembly with the computer base using the alignment posts on the computer base and set the display assembly in place. Ensure the display cable and Mini-Card antenna cables route correctly through the display hinge covers.

Align the display assembly with the computer base using the alignment posts on the computer base and set the display assembly in place. Ensure the display cable and Mini-Card antenna cables route correctly through the display hinge covers.

Step 7

              Replace the Screws
  • Replace the four screws that secure the display assembly to the computer base.

Replace the four screws that secure the display assembly to the computer base.

Step 8

              Routing the Cables
  • Route the Mini-Card antenna cables through the routing guides on the computer base.

Route the Mini-Card antenna cables through the routing guides on the computer base.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Terrence15

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored