Dell Inspiron 11Z 1121 Keyboard Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 minutes

Sections

Battery
1 step
Keyboard
3 steps

Flags

BackDell Inspiron 11z-1121
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Slide the latches outward to release the battery.
Pull the battery outward to remove.
The latches should lock in place, allowing for easy removal.
The battery must be removed for safety reasons when replacing other components of the laptop.

Slide the latches outward to release the battery.

Pull the battery outward to remove.

The latches should lock in place, allowing for easy removal.

The battery must be removed for safety reasons when replacing other components of the laptop.

1024

Step 2

              Keyboard

Unscrew three black 1mm screws using the PH1 Phillips-head screwdriver on the bottom of the laptop around the battery.

Unscrew three black 1mm screws using the PH1 Phillips-head screwdriver on the bottom of the laptop around the battery.

Step 3

Flip the laptop over and open it to expose the keyboard.
Use a plastic opening tool to pry up the keyboard, starting in the upper corner and working your way around.
Once the keyboard is pried up, do not remove the keyboard. There is still a ribbon attaching the keyboard to the laptop.

Flip the laptop over and open it to expose the keyboard.

Use a plastic opening tool to pry up the keyboard, starting in the upper corner and working your way around.

Once the keyboard is pried up, do not remove the keyboard. There is still a ribbon attaching the keyboard to the laptop.

Step 4

Lift the keyboard to expose the ribbon attaching the keyboard to the laptop.
Flip up the black retaining flap on the ZIF connector and then pull the ribbon cable away.
Remove the keyboard from the laptop.

Lift the keyboard to expose the ribbon attaching the keyboard to the laptop.

Flip up the black retaining flap on the ZIF connector and then pull the ribbon cable away.

Remove the keyboard from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors

                    Monika Tomaszewski

Member since: 10/04/2016

158 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       USF Tampa, Team 1-5, Nance Fall 2016                        

                                                  Member of USF Tampa, Team 1-5, Nance Fall 2016 



                    USFT-NANCE-F16S1G5                     


                                            4 Members                     


                                            5 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team