Difficulty

Moderate

Steps

5

Time Required

                          5 minutes            

Sections

3

  • Battery
  • 1 step
  • Keyboard
  • 3 steps
  • Hard Drive
  • 1 step

Flags

0

  • BackDell Inspiron 11z-1121

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Slide the latches outward to release the battery.
  • Pull the battery outward to remove.
  • The latches should lock in place, allowing for easy removal.
  • The battery must be removed for safety reasons when replacing other components of the laptop.

Slide the latches outward to release the battery.

Pull the battery outward to remove.

The latches should lock in place, allowing for easy removal.

The battery must be removed for safety reasons when replacing other components of the laptop.

1024

Step 2

              Keyboard               
  • Unscrew three black 1mm screws using the PH1 Phillips-head screwdriver on the bottom of the laptop around the battery.

Unscrew three black 1mm screws using the PH1 Phillips-head screwdriver on the bottom of the laptop around the battery.

Step 3

  • Flip the laptop over and open it to expose the keyboard.
  • Use a plastic opening tool to pry up the keyboard, starting in the upper corner and working your way around.
  • Once the keyboard is pried up, do not remove the keyboard. There is still a ribbon attaching the keyboard to the laptop.

Flip the laptop over and open it to expose the keyboard.

Use a plastic opening tool to pry up the keyboard, starting in the upper corner and working your way around.

Once the keyboard is pried up, do not remove the keyboard. There is still a ribbon attaching the keyboard to the laptop.

Step 4

  • Lift the keyboard to expose the ribbon attaching the keyboard to the laptop.
  • Flip up the black retaining flap on the ZIF connector and then pull the ribbon cable away.
  • Remove the keyboard from the laptop.

Lift the keyboard to expose the ribbon attaching the keyboard to the laptop.

Flip up the black retaining flap on the ZIF connector and then pull the ribbon cable away.

Remove the keyboard from the laptop.

Step 5

              Hard Drive               
  • The hard drive will be a silver rectangle. Slide the hard drive to the right to remove.
  • To be safe, make sure you either wear an anti-static wrist band, or rub your hands against a metal object to remove any static.

The hard drive will be a silver rectangle. Slide the hard drive to the right to remove.

To be safe, make sure you either wear an anti-static wrist band, or rub your hands against a metal object to remove any static.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Brandan Eng                     

Member since: 10/04/2016

143 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       USF Tampa, Team 1-5, Nance Fall 2016                        

                                                  Member of USF Tampa, Team 1-5, Nance Fall 2016 



                    USFT-NANCE-F16S1G5                     


                                            4 Members                     


                                            5 Guides authored