Dell Inspiron 11Z 1121 Display Assembly Replacement Repair Guide

Difficulty

Easy

Steps

9

Time Required

                          10 - 30 minutes            

Sections

1

• Display Assembly
• 9 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackDell Inspiron 11z-1121

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Disconnecting the Mini-Card Cables               

• WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.
• Disconnect the Mini-Card antenna cables from the Mini-Card(s).

WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.

Disconnect the Mini-Card antenna cables from the Mini-Card(s).

1024

Step 2

              Dislodge the Cables               

• Make note of the cable routing and carefully dislodge the Mini-Card antenna cables from the routing guides.

Make note of the cable routing and carefully dislodge the Mini-Card antenna cables from the routing guides.

Step 3

              Disconnecting the Display Cable               

• Disconnect the display cable from the system board connector.

Disconnect the display cable from the system board connector.

Step 4

              Remove the Screws               

• Remove the two screws (one on each side) that secure the display assembly to the computer base.

Remove the two screws (one on each side) that secure the display assembly to the computer base.

Step 5

              Lifting and Removing the Display Assembly               

• Lift and remove the display assembly off the computer base.

Lift and remove the display assembly off the computer base.

Step 6

              Replace the Screws               

• Place the NEW display assembly in position and replace the two screws (one on each side) that secure the display assembly to the computer base.

Place the NEW display assembly in position and replace the two screws (one on each side) that secure the display assembly to the computer base.

Step 7

              Connecting the Display Cable               

• Connect the display cable to the system board connector.

Connect the display cable to the system board connector.

Step 8

              Routing the Cables               

• Route the Mini-Card antenna cables through the routing guides on the computer base.

Route the Mini-Card antenna cables through the routing guides on the computer base.

Step 9

              Connecting the Cables               

• Connect the Mini-Card antenna cables to the Mini-Card(s).

Connect the Mini-Card antenna cables to the Mini-Card(s).

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Terrence15                     

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges                           

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored