Difficulty
Easy
Steps
10
Time Required
15 - 30 minutes
Sections
1
- Hard Drive
- 10 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackDell Inspiron 11z 1120
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove the Screws
- WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.
- WARNING: If you remove the hard drive from the computer when the drive is hot, do not touch the metal housing of the hard drive.
- CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
- CAUTION: Hard drives are extremely fragile. Exercise care when handling the hard drive.
- Remove the two screws that secure the hard-drive assembly to the computer base.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.
WARNING: If you remove the hard drive from the computer when the drive is hot, do not touch the metal housing of the hard drive.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
CAUTION: Hard drives are extremely fragile. Exercise care when handling the hard drive.
Remove the two screws that secure the hard-drive assembly to the computer base.
1024
Step 2
Disconnecting the Hard Drive Assembly
- Using the pull-tab, slide the hard-drive assembly to the side to disconnect it from the connector on the system board.
Using the pull-tab, slide the hard-drive assembly to the side to disconnect it from the connector on the system board.
Step 3
Lifting the Hard-Drive Assembly
- Lift the hard-drive assembly out of the computer base.
Lift the hard-drive assembly out of the computer base.
Step 4
Remove the Screws
- Remove the four screws that secure the hard-drive bracket to the hard drive.
Remove the four screws that secure the hard-drive bracket to the hard drive.
Step 5
Lifting the Hard-Drive
- Lift the hard-drive bracket off the hard drive.
Lift the hard-drive bracket off the hard drive.
Step 6
Placing the Hard Drive
- Place the NEW hard drive in the hard-drive bracket.
Place the NEW hard drive in the hard-drive bracket.
Step 7
Replace the Screws
- Replace the four screws that secure the hard-drive bracket to the hard drive.
Replace the four screws that secure the hard-drive bracket to the hard drive.
Step 8
Placing the Hard-Drive Assembly
- Place the hard-drive assembly in the computer base.
Place the hard-drive assembly in the computer base.
Step 9
Sliding the Hard-Drive
- Using the pull-tab, slide the hard-drive assembly into the connector on the system board.
Using the pull-tab, slide the hard-drive assembly into the connector on the system board.
Step 10
Replace the Screws
- Replace the two screws that secure the hard-drive assembly to the computer base.
Replace the two screws that secure the hard-drive assembly to the computer base.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Terrence15
Member since: 12/18/2017
78,526 Reputation
441 Guides authored
Badges:
28
+25 more badges
Team
Informative Technologies Inc.
Member of Informative Technologies Inc.
Community
38 Members
1,980 Guides authored