Dell Inspiron 11Z 1110 Display Assembly Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          15 - 35 minutes            

Sections

1

• Display Assembly
• 6 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackDell Inspiron 11z 1110

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Dislodge the Mini-Card Antenna Cables               

• WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.
• CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
• Make note of the cable routing and carefully dislodge the Mini-Card antenna cables from the routing guides.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

Make note of the cable routing and carefully dislodge the Mini-Card antenna cables from the routing guides.

1024

Step 2

              Disconnecting the Display Cable               

• Disconnect the display cable and the camera cable from the system board connectors.

Disconnect the display cable and the camera cable from the system board connectors.

Step 3

              Remove the Screws               

• Remove the two screws (one on each side) that secure the display assembly to the computer base.

Remove the two screws (one on each side) that secure the display assembly to the computer base.

Step 4

              Lifting the Display Assembly               

• Lift the display assembly off the computer.

Lift the display assembly off the computer.

Step 5

              Placing the Display Assembly               

• Place the NEW display assembly in position and replace the two screws (one on each side) that secure the display assembly to the computer base.

Place the NEW display assembly in position and replace the two screws (one on each side) that secure the display assembly to the computer base.

Step 6

              Routing the Mini-Card Antenna Cables               

• Route the Mini-Card antenna cables through the routing guides.

Route the Mini-Card antenna cables through the routing guides.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Terrence15                     

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges                           

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored