Difficulty

Moderate

Steps

10

Time Required

                          15 - 25 minutes

Sections

1

  • Hard Drive
  • 10 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Inspiron 1122 M102z

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Remove the Screws
  • Follow the instructions in Before You Begin.
  • Remove the two screws that secure the hard-drive assembly to the computer base.

Follow the instructions in Before You Begin.

Remove the two screws that secure the hard-drive assembly to the computer base.

1024

Step 2

              Disconnecting the Hard Drive
  • Using the pull-tab, slide the hard-drive assembly to the side to disconnect it from the connector on the system board.

Using the pull-tab, slide the hard-drive assembly to the side to disconnect it from the connector on the system board.

Step 3

              Lifting the Hard-Drive Assembly
  • Lift the hard-drive assembly out of the computer base.

Lift the hard-drive assembly out of the computer base.

Step 4

              Remove the Screws
  • Remove the four screws that secure the hard-drive bracket to the hard drive.

Remove the four screws that secure the hard-drive bracket to the hard drive.

Step 5

              Lifting the Hard-Drive Bracket
  • Lift the hard-drive bracket off the hard drive.

Lift the hard-drive bracket off the hard drive.

Step 6

              Placing the Hard Drive
  • Place the NEW hard drive in the hard-drive bracket.

Place the NEW hard drive in the hard-drive bracket.

Step 7

              Replace the Screws
  • Replace the four screws that secure the hard-drive bracket to the hard drive.

Replace the four screws that secure the hard-drive bracket to the hard drive.

Step 8

              Placing the Hard-Drive Assembly
  • Place the hard-drive assembly in the computer base.

Place the hard-drive assembly in the computer base.

Step 9

              Sliding the Hard-Drive Assembly
  • Using the pull-tab, slide the hard-drive assembly into the connector on the system board.

Using the pull-tab, slide the hard-drive assembly into the connector on the system board.

Step 10

              Replace the Screws
  • Replace the two screws that secure the hard-drive assembly to the computer base.

Replace the two screws that secure the hard-drive assembly to the computer base.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Terrence15

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored