Difficulty
Moderate
Steps
10
Time Required
1 hour
Sections
1
- Processor Fan and Heat Sink
- 10 steps
Flags
0
BackDell Inspiron 11 i3147
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Processor Fan and Heat Sink
- Close the computer and turn it over, with the bottom of the computer facing up.
Close the computer and turn it over, with the bottom of the computer facing up.
1024
Step 2
- Remove the nine 7.6mm PH0 screws on the cover.
Remove the nine 7.6mm PH0 screws on the cover.
Step 3
- Use a plastic opening tool to remove the cover from the computer.
Use a plastic opening tool to remove the cover from the computer.
Step 4
- Remove the three 4.7mm PH0 screws that secure the battery to the computer.
Remove the three 4.7mm PH0 screws that secure the battery to the computer.
Step 5
- Remove the hard drive cable from the battery.
Remove the hard drive cable from the battery.
Step 6
- Lift the battery from the keyboard.
Lift the battery from the keyboard.
Step 7
- Disconnect fan cable with tweezers.
Disconnect fan cable with tweezers.
Step 8
- Use a screwdriver to remove the two 2.3mm PH00 screws on the processor fan.
Use a screwdriver to remove the two 2.3mm PH00 screws on the processor fan.
Step 9
- Use a PH0 screwdriver to loosen the 4 captured screws on the heat sink assembly.
Use a PH0 screwdriver to loosen the 4 captured screws on the heat sink assembly.
Step 10
- Remove the processor fan and heat sink assembly.
Remove the processor fan and heat sink assembly.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Muhammad Erchid
Member since: 10/09/2018
1,051 Reputation
5 Guides authored
Badges:
4
+1 more badge
Team
USF Tampa, Team S1-G6, Leahy Fall 2018
Member of USF Tampa, Team S1-G6, Leahy Fall 2018
USFT-LEAHY-F18S1G6
3 Members
5 Guides authored
