Difficulty

Moderate

Steps

15

Time Required

Suggest a time??

Sections

1

  • Camera
  • 15 steps

Flags

3

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackDell Inspiron 11 i3147

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Camera
  • Close the computer and turn it over, with the bottom of the computer facing up.

Close the computer and turn it over, with the bottom of the computer facing up.

1024

Step 2

  • Remove the nine 7.6mm PH0 screws on the cover.

Remove the nine 7.6mm PH0 screws on the cover.

Step 3

  • Use a plastic opening tool to remove the cover from the computer.

Use a plastic opening tool to remove the cover from the computer.

Step 4

  • Remove the three 4.7mm PH0 screws that secure the battery to the computer.

Remove the three 4.7mm PH0 screws that secure the battery to the computer.

Step 5

  • Remove the hard drive cable from the battery.

Remove the hard drive cable from the battery.

Step 6

  • Lift the battery from the keyboard.

Lift the battery from the keyboard.

Step 7

  • Disconnect antenna cables.

Disconnect antenna cables.

Step 8

  • Remove 2 4mm PH0 screws that connect display cable bracket to the system board.
  • Lift display cable bracket off the system board.

Remove 2 4mm PH0 screws that connect display cable bracket to the system board.

Lift display cable bracket off the system board.

Step 9

  • Use the pull tab to disconnect the display cable from the system board.

Use the pull tab to disconnect the display cable from the system board.

Step 10

  • Pull the windows button board cable from the system board.

Pull the windows button board cable from the system board.

Step 11

  • Remove the 2 5.6mm PH0 screws.

Remove the 2 5.6mm PH0 screws.

Step 12

  • Separate the screen and body of the computer.

Separate the screen and body of the computer.

Step 13

  • Use a plastic opening tool to take the display panel assembly off the display back cover and antenna assembly. Start from the top.

Use a plastic opening tool to take the display panel assembly off the display back cover and antenna assembly. Start from the top.

Step 14

  • Place display panel face down on a flat surface

Place display panel face down on a flat surface

Step 15

  • Use a plastic opening tool to take the camera module off the display.

Use a plastic opening tool to take the camera module off the display.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Muhammad Erchid

Member since: 10/09/2018

1,051 Reputation

                                      5 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       USF Tampa, Team S1-G6, Leahy Fall 2018                        

                                                  Member of USF Tampa, Team S1-G6, Leahy Fall 2018 



                    USFT-LEAHY-F18S1G6                     


                                            3 Members                     


                                            5 Guides authored