Dell Inspiron 11 3164 Battery Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 - 20 minutes

Sections

Battery
4 steps

Flags

BackDell Inspiron 11-3164
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Start by placing the laptop upside down to expose the first set of screws on the bottom of the laptop. Use your J1 Phillips head screwdriver bit to unscrew the 8 size 6 mm screws.
Remove the plastic cover to unveil the final screw holding the front and back frame together.
Remove this last screw of size 6mm with the J1 phillips head bit found in the approved iFixit toolkit.

Start by placing the laptop upside down to expose the first set of screws on the bottom of the laptop. Use your J1 Phillips head screwdriver bit to unscrew the 8 size 6 mm screws.

Remove the plastic cover to unveil the final screw holding the front and back frame together.

Remove this last screw of size 6mm with the J1 phillips head bit found in the approved iFixit toolkit.

1024

Step 2

Using your metal pry tool, slowly pry the two halves apart by gently moving your tool around the laptop . Once all the way around the top and bottom half will separate.
When pulling the laptops apart be careful to hold them together at first due to the sensitive ribbon cable inside.
Use your metal pry tool again to push the ribbon holding clip up and remove the ribbon cable.

Using your metal pry tool, slowly pry the two halves apart by gently moving your tool around the laptop . Once all the way around the top and bottom half will separate.

When pulling the laptops apart be careful to hold them together at first due to the sensitive ribbon cable inside.

Use your metal pry tool again to push the ribbon holding clip up and remove the ribbon cable.

Step 3

Use the J1 screw driver bit from earlier and unscrew the three size 4mm battery screws.

Use the J1 screw driver bit from earlier and unscrew the three size 4mm battery screws.

Step 4

While using one hand to hold the laptop grab the power wire with the other hand and pull it out of it’s port.
Carefully remove the battery pack from the case.

While using one hand to hold the laptop grab the power wire with the other hand and pull it out of it’s port.

Carefully remove the battery pack from the case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    Michael Kendziora

Member since: 02/14/2018

781 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       USF Tampa, Team S6-G4, Eyestone Spring 2018                        

                                                  Member of USF Tampa, Team S6-G4, Eyestone Spring 2018 



                    USFT-EYESTONE-S18S6G4                     


                                            4 Members                     


                                            6 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team