Difficulty

Easy

Steps

13

Time Required

                          10 - 35 minutes

Sections

1

  • Display Assembly
  • 13 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Inspiron 11-3162

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Remove the Screw
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer.After working inside your computer, follow the instructions in After working inside your computer.
  • Remove the screw that secures the display-cable bracket to the system board.

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer.After working inside your computer, follow the instructions in After working inside your computer.

Remove the screw that secures the display-cable bracket to the system board.

1024

Step 2

              Lifting the Display Cable
  • Slide and lift the display-cable bracket off the system board.

Slide and lift the display-cable bracket off the system board.

Step 3

              Open the Latch
  • Open the latch and disconnect the display cable from the system board.

Open the latch and disconnect the display cable from the system board.

Step 4

              Open the Palm Rest
  • Open the palm rest and keyboard assembly at an angle.

Open the palm rest and keyboard assembly at an angle.

Step 5

              Remove the Screws
  • Remove the screws that secure the display assembly to the palm rest and keyboard assembly.

Remove the screws that secure the display assembly to the palm rest and keyboard assembly.

Step 6

              Lifting the Assemblies
  • Slide and lift the palm rest and keyboard assembly off the display assembly.

Slide and lift the palm rest and keyboard assembly off the display assembly.

Step 7

              Placing the Display Assembly
  • Place the NEW display assembly on a flat and clean surface.

Place the NEW display assembly on a flat and clean surface.

Step 8

              Align the Screw Holes
  • Align the screw holes on the display hinges with the screw holes on the palm rest and keyboard assembly.

Align the screw holes on the display hinges with the screw holes on the palm rest and keyboard assembly.

Step 9

              Replace the Screws
  • Replace the screws that secure the display assembly to the palm rest and keyboard assembly.

Replace the screws that secure the display assembly to the palm rest and keyboard assembly.

Step 10

              Securing the Cable
  • Slide the display cable into the connector on the system board and close the latch to secure the cable.

Slide the display cable into the connector on the system board and close the latch to secure the cable.

Step 11

              Sliding the Display Cable
  • Slide the display-cable bracket into the slot on the palm rest and keyboard assembly.

Slide the display-cable bracket into the slot on the palm rest and keyboard assembly.

Step 12

              Align the Screw Hole
  • Align the screw hole on the display-cable bracket with the screw hole on the system board.

Align the screw hole on the display-cable bracket with the screw hole on the system board.

Step 13

              Replace the Screw
  • Replace the screw that secures the display-cable bracket to the system board.

Replace the screw that secures the display-cable bracket to the system board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Terrence15

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored