Difficulty

Moderate

Steps

7

Time Required

                          10 minutes

Sections

2

  • Back Panel
  • 3 steps
  • Battery
  • 4 steps

Flags

0

  • BackDell Inspiron 11-3152

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Flip the computer over.

Flip the computer over.

1024

Step 2

  • Remove all nine 5mm Phillips head screws from the back cover using #0 Phillips head.

Remove all nine 5mm Phillips head screws from the back cover using #0 Phillips head.

Step 3

  • Gently use a spudger to pull the cover away from the rest of the laptop. The cover will come off after you use the tool on two or three sides.

Gently use a spudger to pull the cover away from the rest of the laptop. The cover will come off after you use the tool on two or three sides.

Step 4

              Battery
  • Make sure that the power is off.
  • After taking off the back panel, you will see the battery located at the bottom of the computer system. It’s black and is clearly labeled “dell battery”.

Make sure that the power is off.

After taking off the back panel, you will see the battery located at the bottom of the computer system. It’s black and is clearly labeled “dell battery”.

Step 5

  • Locate the battery at the bottom of the computer and remove the four 3mm screws with a Phillips #0 head that hold the battery down.

Locate the battery at the bottom of the computer and remove the four 3mm screws with a Phillips #0 head that hold the battery down.

Step 6

  • Remove the Solid State Drive wire from the battery clip by detaching the wire.
  • This can be done by gently pulling the connector away from the battery clip.

Remove the Solid State Drive wire from the battery clip by detaching the wire.

This can be done by gently pulling the connector away from the battery clip.

Step 7

  • Remove the battery from the computer system by gently lifting it from the side.

Remove the battery from the computer system by gently lifting it from the side.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Matthew Duncan

Member since: 03/10/2016

481 Reputation

                                      4 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       UMass Dartmouth, Team 4-6, Catania Spring 2016                        

                                                  Member of UMass Dartmouth, Team 4-6, Catania Spring 2016 



                    UMASSD-CATANIA-S16S4G6                     


                                            3 Members                     


                                            6 Guides authored