Difficulty
Moderate
Steps
5
Time Required
15 minutes
Sections
1
- Wireless Card
- 5 steps
Flags
0
BackDell Inspiron 11-3147
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Wireless Card
- Using a plastic Philips Head #1 Screw Driver, remove the nine 7mm screws holding the back cover in place.
- The cover is held on with small plastic tabs. Starting from the back of the machine use your hands to gently prey the back cover from the machine and release these tabs. While a tool is not necessary a plastic spudgercan be used to lift the first few tabs.
Using a plastic Philips Head #1 Screw Driver, remove the nine 7mm screws holding the back cover in place.
The cover is held on with small plastic tabs. Starting from the back of the machine use your hands to gently prey the back cover from the machine and release these tabs. While a tool is not necessary a plastic spudgercan be used to lift the first few tabs.
1024
Step 2
- Remove the single 3mm screw holding down the hardware using a plastic Philips Head #0 Screw Driver.
Remove the single 3mm screw holding down the hardware using a plastic Philips Head #0 Screw Driver.
Step 3
- Detach the wires connected to the wireless card.
Detach the wires connected to the wireless card.
Step 4
- Ensure both wires are detached from the piece.
Ensure both wires are detached from the piece.
Step 5
- Lift the wireless card upwards and remove.
Lift the wireless card upwards and remove.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
William Brum
Member since: 03/04/2016
737 Reputation
5 Guides authored
Badges:
10
+7 more badges
Team
UMass Dartmouth, Team 3-1, Bhusal Spring 2016
Member of UMass Dartmouth, Team 3-1, Bhusal Spring 2016
UMASSD-BHUSAL-S16S3G1
3 Members
8 Guides authored
