Difficulty

Moderate

Steps

3

Time Required

                          15 minutes            

Sections

1

  • Battery
  • 3 steps

Flags

0

  • BackDell Inspiron 11-3147

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Using a Philips Head #1 Screw Driver remove the nine .7mm screws holding the back cover in place.
  • The cover is held on with small plastic tabs. Starting from the back of the machine use your hands to gently prey the back cover from the machine and release these tabs. While a tool is not necessary a plastic plunger can be used to lift the first few tabs.

Using a Philips Head #1 Screw Driver remove the nine .7mm screws holding the back cover in place.

The cover is held on with small plastic tabs. Starting from the back of the machine use your hands to gently prey the back cover from the machine and release these tabs. While a tool is not necessary a plastic plunger can be used to lift the first few tabs.

1024

Step 2

  • The 4mm battery screws can be removed with a philips head #0 screw driver. All the screws that must be removed are shown in the attached pictures.
  • Place screws close by in a safe place such as a magnetic board or cup so they are ready and accounted for when you begin reassembly.

The 4mm battery screws can be removed with a philips head #0 screw driver. All the screws that must be removed are shown in the attached pictures.

Place screws close by in a safe place such as a magnetic board or cup so they are ready and accounted for when you begin reassembly.

Step 3

  • Once the screws have been removed the battery may then be simply removed by hand and replaced.

Once the screws have been removed the battery may then be simply removed by hand and replaced.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    William Brum                     

Member since: 03/04/2016

737 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       UMass Dartmouth, Team 3-1, Bhusal Spring 2016                        

                                                  Member of UMass Dartmouth, Team 3-1, Bhusal Spring 2016 



                    UMASSD-BHUSAL-S16S3G1                     


                                            3 Members                     


                                            8 Guides authored