Difficulty

Moderate

Steps

3

Time Required

                          20 minutes            

Sections

1

  • RAM
  • 3 steps

Flags

0

  • BackDell Inspiron 11-3147

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              RAM               
  • Using a Philips Head #1 Screw Driver remove the nine .7mm screws holding the back cover in place.
  • The cover is held on with small plastic tabs. Starting from the back of the machine use your hands to gently prey the back cover from the machine and release these tabs. While a tool is not necessary a plastic plunger can be used to lift the first few tabs.

Using a Philips Head #1 Screw Driver remove the nine .7mm screws holding the back cover in place.

The cover is held on with small plastic tabs. Starting from the back of the machine use your hands to gently prey the back cover from the machine and release these tabs. While a tool is not necessary a plastic plunger can be used to lift the first few tabs.

1024

Step 2

  • Place finger nails on both of the little metal tabs that are located on shorter sides of the Ram board.
  • Pull tabs outward and away from the Ram card. This will detach the card from the computer and allow removal.

Place finger nails on both of the little metal tabs that are located on shorter sides of the Ram board.

Pull tabs outward and away from the Ram card. This will detach the card from the computer and allow removal.

Step 3

  • Carefully remove the RAM to ensure no other components get damaged.
  • Replace with a new RAM card the exact way it came out, with the the shiny metallic part of the card placed inside black insert as shown in the picture.

Carefully remove the RAM to ensure no other components get damaged.

Replace with a new RAM card the exact way it came out, with the the shiny metallic part of the card placed inside black insert as shown in the picture.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    William Brum                     

Member since: 03/04/2016

737 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       UMass Dartmouth, Team 3-1, Bhusal Spring 2016                        

                                                  Member of UMass Dartmouth, Team 3-1, Bhusal Spring 2016 



                    UMASSD-BHUSAL-S16S3G1                     


                                            3 Members                     


                                            8 Guides authored