Difficulty
Moderate
Steps
11
Time Required
Suggest a time??
Sections
2
- Dell Inspiron N4050 Teardown
- 10 steps
- Hard Drive
- 1 step
Flags
1
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackLaptop Dell Inspiron N4050
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Removing the battery part 1
- Check your laptop model
- Turn it over to work on the bottom of the laptop
- Open the first latch for the battery
Check your laptop model
Turn it over to work on the bottom of the laptop
Open the first latch for the battery
1024
Step 2
Remove the battery part 2
- Open the second latch in the direction that the arrow is pointing. This requires more effort than the first one.
- The battery will come out a little. Finish removing it gently.
Open the second latch in the direction that the arrow is pointing. This requires more effort than the first one.
The battery will come out a little. Finish removing it gently.
Step 3
Remove the bottom screws
- Remove the 8 screws.
- Use a Phillips 0 screwdriver.
Remove the 8 screws.
Use a Phillips 0 screwdriver.
Step 4
Removing the keyboard part 1
- Turn the laptop with the keyboard facing up.
- Use a flat-blade screwdriver to separate the keyboard from the computer case.
- Tilt the keyboard as shown in the image. Do not remove it completely because it is connected to a cable.
Turn the laptop with the keyboard facing up.
Use a flat-blade screwdriver to separate the keyboard from the computer case.
Tilt the keyboard as shown in the image. Do not remove it completely because it is connected to a cable.
Step 5
Remove the cable that connects the keyboard to the motherboard
- Remove the clip that holds the cable to the motherboard.
- Remove the cable.
Remove the clip that holds the cable to the motherboard.
Remove the cable.
Step 6
Remove the RAM
- Remove the memory cards by moving the retaining clips in the direction that the arrows are pointing.
Remove the memory cards by moving the retaining clips in the direction that the arrows are pointing.
Step 7
Remove the screws
- Remove the 3 screws.
Remove the 3 screws.
Step 8
Remove the small cables
- Remove the 2 small cables.
Remove the 2 small cables.
Step 9
- Use a plastic tool to separate the top of the laptop.
Use a plastic tool to separate the top of the laptop.
Step 10
Internal parts of the laptop
- CPU
- DDR3 RAM memory, 2 slots avaiable
- SATA hard disc
- Heatsink
- DVD unit
- Wireless network card
- Battery for the internal clock
CPU
DDR3 RAM memory, 2 slots avaiable
SATA hard disc
Heatsink
DVD unit
Wireless network card
Battery for the internal clock
Step 11
Hard Drive
- The hard disc does not have this support to the mother board from the factory. It is only attached by the SATA connector.
- Height is 8.5 mm
The hard disc does not have this support to the mother board from the factory. It is only attached by the SATA connector.
Height is 8.5 mm
To reassemble your device, follow these instructions in reverse.
Cancel: I did not complete this guide.
5 other people completed this guide.
These translators are helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
WhoDat?
Jacob Pieczynski
Author
with 1 other contributor
Marcos Mora
Member since: 12/17/2017
3,201 Reputation
11 Guides authored
Badges:
16
+13 more badges