Dell Dj Disassembly Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 minutes

Sections

Dell DJ Disassembly
4 steps

Flags

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

BackDell DJ
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Dell DJ Disassembly

Inspect your device and be sure that it matches the device that this guide is disassembling.
Familiarize yourself with the specific design of the device.
Battery replacement is the only repair that our guide offers that does not require a complete tear down.

Inspect your device and be sure that it matches the device that this guide is disassembling.

Familiarize yourself with the specific design of the device.

Battery replacement is the only repair that our guide offers that does not require a complete tear down.

1024

Step 2

Remove the bottom panel with the metal spudger. This panel may be fused to the outer shell with a dot of adhesive.
Four screws fasten a metal plate to the device. Using the device magnetic mat and 54 bit (Phillips J000) driver, remove the screws.
Be sure to keep the 4mm screws together and organized on the device magnet plate.

Remove the bottom panel with the metal spudger. This panel may be fused to the outer shell with a dot of adhesive.

Four screws fasten a metal plate to the device. Using the device magnetic mat and 54 bit (Phillips J000) driver, remove the screws.

Be sure to keep the 4mm screws together and organized on the device magnet plate.

Step 3

The top plate of the device is attached by a dot of glue. Use the metal spudger to pry the plate off.
After the top plate is removed, remove the four 4mm screws that attach the inner plate.
When the plate is removed, the motherboard will be ready to be removed.

The top plate of the device is attached by a dot of glue. Use the metal spudger to pry the plate off.

After the top plate is removed, remove the four 4mm screws that attach the inner plate.

When the plate is removed, the motherboard will be ready to be removed.

Step 4

Slide the motherboard out of the protective case.
Be careful not to snag any wires.
When the motherboard is exposed the device is ready to be inspected and repaired.

Slide the motherboard out of the protective case.

Be careful not to snag any wires.

When the motherboard is exposed the device is ready to be inspected and repaired.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    William Abel

Member since: 01/28/2016

164 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       USF Sarasota-Manatee, Team 1-1, Stewart Spring 2016                        

                                                  Member of USF Sarasota-Manatee, Team 1-1, Stewart Spring 2016 



                    USFSM-STEWART-S16S1G1                     


                                            3 Members                     


                                            5 Guides authored

kf4qic - Jul 4, 2019

How did you get the logic board to slide past the scroll wheel ?

Markup Mishap#

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Markup Mishap

Introduction

What you need

Team