Dell Dj Battery Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          6 minutes

Sections

Battery
5 steps

Flags

BackDell DJ
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

First, disassemble the device, taking off the bottom panel. See the disassembly guide for further directions.

First, disassemble the device, taking off the bottom panel. See the disassembly guide for further directions.

1024

Step 2

Using the metal spudger, carefully slide it under the black rubber bottom to remove it.
Using a Phillips J000 head screw driver, unscrew the 4mm screws placed on the outer corners of the metal plate.
Again, take the metal spudger, placing it under the metal plate to take it off.

Using the metal spudger, carefully slide it under the black rubber bottom to remove it.

Using a Phillips J000 head screw driver, unscrew the 4mm screws placed on the outer corners of the metal plate.

Again, take the metal spudger, placing it under the metal plate to take it off.

Step 3

Once the metal plate is off, inspect the inside of the device to be sure the battery is plugged in and there’s nothing blocking it.
Battery malfunction is often caused by internal components that are dirty. Be sure the battery clip is plugged in properly and then reassemble device. Hold the power button and start the device up.

Once the metal plate is off, inspect the inside of the device to be sure the battery is plugged in and there’s nothing blocking it.

Battery malfunction is often caused by internal components that are dirty. Be sure the battery clip is plugged in properly and then reassemble device. Hold the power button and start the device up.

Step 4

If the battery is still malfunctioning, carefully unplug the battery using tweezers.
Gently place the tweezers on either side of the batter to slide it out of the shell.

If the battery is still malfunctioning, carefully unplug the battery using tweezers.

Gently place the tweezers on either side of the batter to slide it out of the shell.

Step 5

To replace the battery, simply insert a new one into the same slot and then plug in the end to the correct spot.
After the device is assembled, power the device on. The issue should be repaired.
If the device battery is still defective, a greater issue is the cause.

To replace the battery, simply insert a new one into the same slot and then plug in the end to the correct spot.

After the device is assembled, power the device on. The issue should be repaired.

If the device battery is still defective, a greater issue is the cause.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Brittany Abate

Member since: 01/03/2016

407 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       USF Sarasota-Manatee, Team 1-1, Stewart Spring 2016                        

                                                  Member of USF Sarasota-Manatee, Team 1-1, Stewart Spring 2016 



                    USFSM-STEWART-S16S1G1                     


                                            3 Members                     


                                            5 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team