Difficulty
Moderate
Steps
11
Time Required
10 - 15 minutes
Sections
2
- Side Panel
- 3 steps
- Optical Drive
- 8 steps
Flags
1
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackDell Dimension 4600
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Side Panel
- Locate the case cover latch on the back of the computer.
Locate the case cover latch on the back of the computer.
1024
Step 2
- Using your index finger, slide and hold the cover latch down.
- While holding the latch down, place your other hand flat on the side of the case and firmly shift the side panel to the left until it disengages.
Using your index finger, slide and hold the cover latch down.
While holding the latch down, place your other hand flat on the side of the case and firmly shift the side panel to the left until it disengages.
Step 3
- Grab the edge of the panel and slide it away from the case until it is removed.
Grab the edge of the panel and slide it away from the case until it is removed.
Step 4
Optical Drive
- Locate the Optical Drive by finding it externally on the case.
Locate the Optical Drive by finding it externally on the case.
Step 5
- Press and hold the three levers located behind the front panel.
- While holding the levers down, swing open the front panel.
Press and hold the three levers located behind the front panel.
While holding the levers down, swing open the front panel.
Step 6
- Swing the front of the case open until it separates from the main case.
Swing the front of the case open until it separates from the main case.
Step 7
- Lay the computer flat on it’s side so that you are looking down on all of the components.
- Locate the Drive 1 cable and where it is connected to the motherboard.
Lay the computer flat on it’s side so that you are looking down on all of the components.
Locate the Drive 1 cable and where it is connected to the motherboard.
Step 8
- Grasp the end of the Drive 1 cable connected to the motherboard and firmly pull upwards until it is removed.
Grasp the end of the Drive 1 cable connected to the motherboard and firmly pull upwards until it is removed.
Step 9
- Locate the end of the Drive 1 cable connected to the optical drive.
- Grasp the cable and pull firmly to disconnect it from the optical drive.
Locate the end of the Drive 1 cable connected to the optical drive.
Grasp the cable and pull firmly to disconnect it from the optical drive.
Step 10
- Locate the screw on the optical drive.
- Remove the 7.7 mm screw by using a Phillips #2 screw-driver.
Locate the screw on the optical drive.
Remove the 7.7 mm screw by using a Phillips #2 screw-driver.
Step 11
- Remove the optical drive by sliding it out of the front of the case.
Remove the optical drive by sliding it out of the front of the case.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
13 other people completed this guide.
Author
with 9 other contributors
Eugene
Member since: 10/12/2011
216 Reputation
1 Guide authored
Badges:
7
+4 more badges
Team
Cal Poly, Team 6-10, Regan Fall 2011
Member of Cal Poly, Team 6-10, Regan Fall 2011
CPSU-REGAN-F11S6G10
4 Members
11 Guides authored