Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

1

  • LCD panel
  • 5 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Chromebook 3180

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Prepare CB for LCD Bezel Removal
  • Open the chromebook until its completely flat on the table
  • Remove both the left and right hinge caps
  • Remove a total of 4 screws. One in each corner.

Open the chromebook until its completely flat on the table

Remove both the left and right hinge caps

Remove a total of 4 screws. One in each corner.

1024

Step 2

              Remove the LCD Bezel
  • Use a plastic pry tool or blade and start in the top left corner or first left plastic ridge.

Use a plastic pry tool or blade and start in the top left corner or first left plastic ridge.

Step 3

              Remove LCD screen
  • Remove a total of 4 screws. One in each corner
  • Lift up the LCD screen from within the LCD assembly frame.
  • On the back of the LCD screen, remove the tape and LCD connector

Remove a total of 4 screws. One in each corner

Lift up the LCD screen from within the LCD assembly frame.

On the back of the LCD screen, remove the tape and LCD connector

Step 4

              Install New LCD Screen
  • Attach the LCD connector
  • re-apply the tape to the LCD connector
  • Set the new LCD screen into the LCD assembly frame while matching up the screw ports in each corner

Attach the LCD connector

re-apply the tape to the LCD connector

Set the new LCD screen into the LCD assembly frame while matching up the screw ports in each corner

Step 5

              Reinstall LCD Bezel
  • When installing the LCD bezel, look for the plastic hinge outlines on each side and match them up with the metal hinges on the chromebook.
  • Snap the LCD bezel in place until it is flush with the entire LCD assembly

When installing the LCD bezel, look for the plastic hinge outlines on each side and match them up with the metal hinges on the chromebook.

Snap the LCD bezel in place until it is flush with the entire LCD assembly

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Jon

Member since: 08/18/2013

3,901 Reputation

                                      22 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges