Difficulty

Very easy

Steps

3

Time Required

                          1 - 2 minutes

Sections

1

  • LCD Bezel Frame
  • 3 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Chromebook 3180

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Prepare CB for LCD Bezel Removal
  • Open the chromebook until its completely flat on the table
  • Remove both the left and right hinge caps
  • Remove a total of 4 screws. One in each corner.

Open the chromebook until its completely flat on the table

Remove both the left and right hinge caps

Remove a total of 4 screws. One in each corner.

1024

Step 2

              Remove the LCD Bezel
  • Use a plastic pry tool or blade and start in the top left corner or first left plastic ridge.
  • There seems to be more adhesive at the bottom of the bezel where it shows the Dell logo. Watch this area for some LCD electrical tape (black) as it will stick to the LCD bezel as you try and remove it.

Use a plastic pry tool or blade and start in the top left corner or first left plastic ridge.

There seems to be more adhesive at the bottom of the bezel where it shows the Dell logo. Watch this area for some LCD electrical tape (black) as it will stick to the LCD bezel as you try and remove it.

Step 3

              Install LCD Bezel
  • UPDATE - Don’t forget to peel off the double sided sticky paper from the back of the new LCD bezel. This will help secure the bezel into place in addition to the 4 corner screws.
  • When installing the LCD bezel, look for the plastic hinge outlines on each side and match them up with the metal hinges on the chromebook.
  • Snap the LCD bezel in place until it is flush with the entire LCD assembly

UPDATE - Don’t forget to peel off the double sided sticky paper from the back of the new LCD bezel. This will help secure the bezel into place in addition to the 4 corner screws.

When installing the LCD bezel, look for the plastic hinge outlines on each side and match them up with the metal hinges on the chromebook.

Snap the LCD bezel in place until it is flush with the entire LCD assembly

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Jon

Member since: 08/18/2013

3,901 Reputation

                                      22 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges