Dell Chromebook 11 Cb1C13 Screen Cover Replacement Repair Guide

Difficulty

Difficult

Steps

Time Required

                          10 minutes

Sections

Back Panel
1 step
Screen Cover
3 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

BackDell Chromebook 11 CB1C13
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Panel

Make sure that device is fully powered down before attempting to open the back case.
Remove all seven 8 mm Philips #0 screws from the back case with a Philips #0 screwdriver.
Once all seven screws are removed, you can pry the case off using your fingers or a plastic opening tool.

Make sure that device is fully powered down before attempting to open the back case.

Remove all seven 8 mm Philips #0 screws from the back case with a Philips #0 screwdriver.

Once all seven screws are removed, you can pry the case off using your fingers or a plastic opening tool.

1024

Step 2

              Screen Cover

Locate the two hinges on the corners of the device.
Unscrew the 5 2mm Phillips #00 screws in the hinges.
Pull the hinges up and slide bottom cover out
Gently remove the cover since it is still connected to the device by some wires

Locate the two hinges on the corners of the device.

Unscrew the 5 2mm Phillips #00 screws in the hinges.

Pull the hinges up and slide bottom cover out

Gently remove the cover since it is still connected to the device by some wires

Step 3

Locate the two cables that connect the top panel to the device. One black, and one white.
Remove these two cables by grabbing the golden ends with your fingers, and gently pulling straight up.
Remove pin port lifting up the hinge.

Locate the two cables that connect the top panel to the device. One black, and one white.

Remove these two cables by grabbing the golden ends with your fingers, and gently pulling straight up.

Remove pin port lifting up the hinge.

Step 4

Locate the seam between the screen cover, and the top panel
Starting at one of the hinge corners, take a thin metal prying tool and gently insert it into the seam.
Gently push the tool down towards the top panel until you feel the screen cover disconnect.
Repeat this process all around the screen cover until it is completely disconnected from the top panel.
During this process, you might hear a rough snapping sound. This is normal, and is just the sound of the screen cover’s connections to the top panel coming apart.
Make sure to be gentle with your prying, and to move in small increments around the screen cover during this process. This is to prevent any cracks or damage to the cover, which could be harmful.

Locate the seam between the screen cover, and the top panel

Starting at one of the hinge corners, take a thin metal prying tool and gently insert it into the seam.

Gently push the tool down towards the top panel until you feel the screen cover disconnect.

Repeat this process all around the screen cover until it is completely disconnected from the top panel.

During this process, you might hear a rough snapping sound. This is normal, and is just the sound of the screen cover’s connections to the top panel coming apart.

Make sure to be gentle with your prying, and to move in small increments around the screen cover during this process. This is to prevent any cracks or damage to the cover, which could be harmful.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Jerry Geffrard

Member since: 03/25/2015

322 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       UMass Dartmouth, Team S3-G6, Bailey Fall 2017                        

                                                  Member of UMass Dartmouth, Team S3-G6, Bailey Fall 2017 



                    UMASSD-BAILEY-F17S3G6                     


                                            3 Members                     


                                            7 Guides authored

Needs Better Images#

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Needs Better Images

Introduction

What you need

Team