Dell Chromebook 11 Cb1C13 Fan Replacement Repair Guide

Difficulty

Moderate

Steps

3

Time Required

                          10 minutes            

Sections

2

• Back Panel
• 1 step
• Fan
• 2 steps

Flags

0

• BackDell Chromebook 11 CB1C13

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Panel               

• Make sure that device is fully powered down before attempting to open the back case.
• Remove all seven 8 mm Philips #0 screws from the back case with a Philips #0 screwdriver.
• Once all seven screws are removed, you can pry the case off using your fingers or a plastic opening tool.

Make sure that device is fully powered down before attempting to open the back case.

Remove all seven 8 mm Philips #0 screws from the back case with a Philips #0 screwdriver.

Once all seven screws are removed, you can pry the case off using your fingers or a plastic opening tool.

1024

Step 2

              Fan               

• Locate the two wires that connect the fan to the device. One black, and one white.
• Move these wires off of the fan by gently pulling on them.
• Locate the two 8mm Philips #0 screws that connect the fan to the device.
• Remove these screws using a Philips #0 screwdriver.

Locate the two wires that connect the fan to the device. One black, and one white.

Move these wires off of the fan by gently pulling on them.

Locate the two 8mm Philips #0 screws that connect the fan to the device.

Remove these screws using a Philips #0 screwdriver.

Step 3

• The fan is connected by a 5 pin port. Remove this by gently prying out the fan’s port using your fingers or a plastic prying tool.
• The pin port can be very delicate. Any major bending or twisting can cause permanent damage to the port, and may leave it unable to work.

The fan is connected by a 5 pin port. Remove this by gently prying out the fan’s port using your fingers or a plastic prying tool.

The pin port can be very delicate. Any major bending or twisting can cause permanent damage to the port, and may leave it unable to work.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Bryan Allen                     

Member since: 10/20/2017

272 Reputation

                                      2 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       UMass Dartmouth, Team S3-G6, Bailey Fall 2017                        

                                                  Member of UMass Dartmouth, Team S3-G6, Bailey Fall 2017 



                    UMASSD-BAILEY-F17S3G6                     


                                            3 Members                     


                                            7 Guides authored                     

flip - Jun 7, 2018

Reply

Ram?

Can i change the ram?