Dell Chromebook 11 3189 Display Assembly Replacement Repair Guide

Difficulty

Easy

Steps

9

Time Required

                          15 - 25 minutes            

Sections

1

• Display Assembly
• 9 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackDell Chromebook 11 3189

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Replace the Display Hinge               

• Follow the procedure in Before Working Inside Your Computer.
• Remove the display hinge screws M2.0xM5.0 that secure the display assembly to the computer.

Follow the procedure in Before Working Inside Your Computer.

Remove the display hinge screws M2.0xM5.0 that secure the display assembly to the computer.

1024

Step 2

              Lifting the Display Assembly               

• Lift the display assembly away from the computer.

Lift the display assembly away from the computer.

Step 3

              Place the Display Assembly               

• Place the display assembly to align with the screw holders on the computer.

Place the display assembly to align with the screw holders on the computer.

Step 4

              Replace the Screws               

• Replace the screws that secure the display hinges to the palm-rest assembly.

Replace the screws that secure the display hinges to the palm-rest assembly.

Step 5

              Connecting the Sensor Cable               

• Flip over the computer and connect the sensor cable on the system board.

Flip over the computer and connect the sensor cable on the system board.

Step 6

              Connecting the Display Cable               

• Connect the display cable to the connector on the system board.

Connect the display cable to the connector on the system board.

Step 7

              Securing the Screws               

• Place the metal bracket over the (display cable) connector, and tighten the M2.0x3.0 screws to secure the display cable to the computer.

Place the metal bracket over the (display cable) connector, and tighten the M2.0x3.0 screws to secure the display cable to the computer.

Step 8

              Connecting the WLAN cables.               

• Connect the WLAN cables.

Connect the WLAN cables.

Step 9

              Placing the Metal Bracket               

• Place the metal bracket, and tighten the M2.0x3.0 screw to the WLAN cable on the system board.

Place the metal bracket, and tighten the M2.0x3.0 screw to the WLAN cable on the system board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Terrence15                     

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges                           

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored                     

jordi fernandez - Feb 1, 2020

Reply

Hola, he remplazado la pantalla. El montaje perfecto pero no enciende. Hay que hacer algo en concreto? Me refiero para que detecte esta pantalla nueva.

Muchas gracias